The  100i air Plasma Cutter is an economical plasma cutting system for non-ferrous metal such as stainless steel,carbon steel,alloy steel,aluminum,copper and brass.which has adopted IGBT technology, This portable unit features a lightweight, powerful inverter design and an ergonomic trigger safety, with more efficient air consumption and economically priced consumables. And you'll never have gas pressure settings, flame tuning, metal preheating, or gas cylinders or refills to worry about.it  can be fitted with handheld torch or CNC automatic cutter.its cutting speed has been greatly increased.and much more ecnomical and time-saving  than gas/flame cutter.longer life and less comsumables replacement.Â
Advantage
1.Available with CNC cutting system to fit the application.
2.Compact size,Light weight,energy saving,60% high duty cycle.
3.Cutting current can be presetted accurately.
4,Fast high frequency arc starting enable the reduction of interference to CNC system.
5.Stable plasma arc,fast cut speeds,smooth incision,little deformation.
Manual cutting
CNC plasma cutting:
Manual plasma cutter is too slow,you need to cut more complex graphics,quicker cutting speed and higher cutting accuracy,you may try LG-100 plasma power source + ZNC-1500A portable  CNC cutting machine
Cutting samples:
Detailed picture:
Parameter
Type
LG-100
LG-130
LG-200
LG-400
rated input voltage
3phase 380VACÂ Â 50HZ
Â
rated input capacity
14.5KVA
20KVA
35KVA
100KVA
rated output current
100A
130A
130A
160
200-400
rated output voltage
120V
132V
160V
200V
Rated Duty Cycle
60%
60%
60%
60%
current adjust range
30~100A
30~130A
30~200A
30-400A
optimal cutting thickness of steel
0.3~22mm
0.3~30mm
1~45MM
1-50mm
MAX cutting thickness of steel
40mm
45mm
65MM
80mm
use plasma gaseous
Compressed air
Compressed air
Compressed air
Compressed air
Pressure range of
Working plasma gaseousÂ
0.4~0.5MPa
0.4~0.6MPa
0.4~0.6MPa
Â
 torch cooling type
Air-cool
Water-cool
Water-cool
Water-cool
arc start type
non-touch arc start
Â
Out dimension(mm)(longitude*width*height)
600*325*740
710*380*790
800*360*880
1260*540*830
weight
51Kg
58Kg
75Kg
170
Plasma Cutting Thickness(with Domestic P80,YY Torch)
Â
 Thick mmÂ
Â
materialLG-100(D)
LG-130
LG-200
LG-400
handle
machine
handle
machine
handle
machine
handle
machine
C.S.
0.3-30
1-22
0.3-35
1-25
1-65
1-45
1-80
1-50
S.S.
0.3-30
1-22
0.3-35
1-25
1-65
1-45
1-80
1-50
Aluminum
0.3-25
1-16
0.3-26
1-19
1-48
1-33
1-60
1-38
Red copper
0.3-10
1-6
0.3-9
1-7
1-16
1-11
1-20
1-12
What's Included
(1) 100i Plasma cutter
(1) 6Â m hand-held torchÂ
(1) 3m work cable with clamp
(1) .power cord with plug
Extra Consumables (10 electrode, 10 tips,10 sheild cover)
Cut with Quality and Confidence
About CHD
Founded in 1989,with 28 years experience in cutting machine and welding machine market,with ISO9001 certified enterprise ,CCC certified enterprise ,CE certified enterprise.
Drafter of the national standard of the arc welding machines.3 manufacture bases and plant area of more than 53000 square meters,Participated in 3 drafts of China Natinal Standard and own 9 invention patents.our products have been sold to more than 70 countries,the sales quantity of cutting machines are more than 10000 every year.
FAQ
1. Q: Are you manufaturer or trading company?
    A: We are a factory with 28 years manufacturing experience.our main products are IGBT inverter air plasma          cutter,CNC cutting machine,welding machine,beveling machine.
2. Q: what certificate do you get?
    A: CE ,ISO,CCC and SGS.
3. Q:What is payment terms?
   A:For amount less than USD3000,100% TT in advance,more than USD3000,30% TT in advance,and          then 70% against copy of Bill of lading.
4Â Â Â Q:Delivery time?
    A:15  days after receipt of remittance.
5Â Â Â Q:what is your garantee period?
    A:1 year.free parts within gartantee period.
6  Q:where is your factory located?how can i visit?
    A:Our factory is located in Jiading District Shanghai City China. If you would like to visit our factory,     we are glad to pick you up at the airport or train station.
7Â Â Â Q:what after-sale service do you offer?
     A: 24 Hours Online Service, free parts replacement within 1 year. and paid overseas service providedÂ
Â
LG-100 plasma cutter
The  100i air Plasma Cutter is an economical plasma cutting system for non-ferrous metal such as stainless steel,carbon steel,alloy steel,aluminum,copper and brass.which has adopted IGBT technology, This portable unit features a lightweight, powerful inverter design and an ergonomic trigger safety, with more efficient air consumption and economically priced consumables. And you'll never have gas pressure settings, flame tuning, metal preheating, or gas cylinders or refills to worry about.it  can be fitted with handheld torch or CNC automatic cutter.its cutting speed has been greatly increased.and much more ecnomical and time-saving  than gas/flame cutter.longer life and less comsumables replacement.Â
Advantage
1.Available with CNC cutting system to fit the application.
2.Compact size,Light weight,energy saving,60% high duty cycle.
3.Cutting current can be presetted accurately.
4,Fast high frequency arc starting enable the reduction of interference to CNC system.
5.Stable plasma arc,fast cut speeds,smooth incision,little deformation.
Manual cutting
CNC plasma cutting:
Manual plasma cutter is too slow,you need to cut more complex graphics,quicker cutting speed and higher cutting accuracy,you may try LG-100 plasma power source + ZNC-1500A portable  CNC cutting machine
Cutting samples:
Detailed picture:
Parameter
Type
LG-100
LG-130
LG-200
LG-400
rated input voltage
3phase 380VACÂ Â 50HZ
Â
rated input capacity
14.5KVA
20KVA
35KVA
100KVA
rated output current
100A
130A
130A
160
200-400
rated output voltage
120V
132V
160V
200V
Rated Duty Cycle
60%
60%
60%
60%
current adjust range
30~100A
30~130A
30~200A
30-400A
optimal cutting thickness of steel
0.3~22mm
0.3~30mm
1~45MM
1-50mm
MAX cutting thickness of steel
40mm
45mm
65MM
80mm
use plasma gaseous
Compressed air
Compressed air
Compressed air
Compressed air
Pressure range of
Working plasma gaseousÂ
0.4~0.5MPa
0.4~0.6MPa
0.4~0.6MPa
Â
 torch cooling type
Air-cool
Water-cool
Water-cool
Water-cool
arc start type
non-touch arc start
Â
Out dimension(mm)(longitude*width*height)
600*325*740
710*380*790
800*360*880
1260*540*830
weight
51Kg
58Kg
75Kg
170
Plasma Cutting Thickness(with Domestic P80,YY Torch)
Â
 Thick mmÂ
Â
materialLG-100(D)
LG-130
LG-200
LG-400
handle
machine
handle
machine
handle
machine
handle
machine
C.S.
0.3-30
1-22
0.3-35
1-25
1-65
1-45
1-80
1-50
S.S.
0.3-30
1-22
0.3-35
1-25
1-65
1-45
1-80
1-50
Aluminum
0.3-25
1-16
0.3-26
1-19
1-48
1-33
1-60
1-38
Red copper
0.3-10
1-6
0.3-9
1-7
1-16
1-11
1-20
1-12
What's Included
(1) 100i Plasma cutter
(1) 6Â m hand-held torchÂ
(1) 3m work cable with clamp
(1) .power cord with plug
Extra Consumables (10 electrode, 10 tips,10 sheild cover)
Cut with Quality and Confidence
About CHD
Founded in 1989,with 28 years experience in cutting machine and welding machine market,with ISO9001 certified enterprise ,CCC certified enterprise ,CE certified enterprise.
Drafter of the national standard of the arc welding machines.3 manufacture bases and plant area of more than 53000 square meters,Participated in 3 drafts of China Natinal Standard and own 9 invention patents.our products have been sold to more than 70 countries,the sales quantity of cutting machines are more than 10000 every year.
FAQ
1. Q: Are you manufaturer or trading company?
    A: We are a factory with 28 years manufacturing experience.our main products are IGBT inverter air plasma          cutter,CNC cutting machine,welding machine,beveling machine.
2. Q: what certificate do you get?
    A: CE ,ISO,CCC and SGS.
3. Q:What is payment terms?
   A:For amount less than USD3000,100% TT in advance,more than USD3000,30% TT in advance,and          then 70% against copy of Bill of lading.
4Â Â Â Q:Delivery time?
    A:15  days after receipt of remittance.
5Â Â Â Q:what is your garantee period?
    A:1 year.free parts within gartantee period.
6  Q:where is your factory located?how can i visit?
    A:Our factory is located in Jiading District Shanghai City China. If you would like to visit our factory,     we are glad to pick you up at the airport or train station.
7Â Â Â Q:what after-sale service do you offer?
     A: 24 Hours Online Service, free parts replacement within 1 year. and paid overseas service providedÂ
Â
3 phase IGBT handheld inverter air CNC plasma cutter for sheet metal
Model NO.: LG-100
Cutting Torch Cooling Code: Air Cooling
Lead Time: 15 Working Days
Working Voltage: 3 Phase 380V
Certificate: Ce
Warranty: 1 year
Max Cutting thickness: 30mm
Duty cycle: 60%
Rated power: 14.5kVA
Input voltage: can be 3 phase 380V or 3 phase 220V
Output current: 30-100A
Trademark: CHD
Transport Package: Carton or Wooden Box
Specification: 600*325*740
Origin: Shanghai
HS Code: 8456901000
Model NO.: LG-100
Cutting Torch Cooling Code: Air Cooling
Lead Time: 15 Working Days
Working Voltage: 3 Phase 380V
Certificate: Ce
Warranty: 1 year
Max Cutting thickness: 30mm
Duty cycle: 60%
Rated power: 14.5kVA
Input voltage: can be 3 phase 380V or 3 phase 220V
Output current: 30-100A
Trademark: CHD
Transport Package: Carton or Wooden Box
Specification: 600*325*740
Origin: Shanghai
HS Code: 8456901000
LG-100 plasma cutter