Flanged DIN Pn16/JIS 10K Pneumatic Angle Seat Piston Control Valve Flange End Steam Valve

Model NO.: 1/4"~4"(DN10-DN100)

Media: Gas, Oil, Water, Acid

Connection Mode: Flange

Material: Stainless Steel

Working Pressure: 0.1-1.6MPa

Port Size: Dn10,15,20,25,32,40,50,65,80,100

Acting: Double Acting,Normally Open/Cloase(No/Nc)

Manual Overrides: with Manual Overrides Device(Optional)

Trademark: neutral brand or customizable

Specification: 1/2"~4"(DN15~DN100)

HS Code: 8481202000

Certification: GS, RoHS, CE, ISO9001

Standard: Standard

Power: Pneumatic

Type: Single Seater

Air Control Supply Pressure: 0.3--0.8MPa

Actuator Cylinder Size: 27/40/50/63/90/90al/125al

Actuator Material: Stainless Steel or ABS Plastic

Optional Accessories: Ep-Positioner,Solenoid Valve,Limit Switch

Transport Package: Packing with Plywood Case

Origin: China

Investment casted stainless steel angle seat valve pneumatic angle seat piston control valve for steam
Design feature:
Stainless steel or gunmetal housing with sleeve, clamped or welded connection
High flow rate
Over 3 years long service life, 3 million cycles loaded test.
Trusted inner parts for long cycle life
Large accessory program with stroke limitation and feedback
Robust actuators with modular accessory program
Investment casting

SPECS.
Size: 1/4"~4"(DN10-DN100)
P/N: DIN 1.6MPa, JIS 10K
Meium: neutral-water/oil/gas,steam,organic solvent,weak acid,weak alkaline
Fluid temp. : -50ÂºC--230ÂºC
Ambient temp:Â -10ÂºC--80ÂºC
Operation: pneumatic
Control medium:Â neutral air
Air control supply pressure:Â 0.3--0.8MPa

Material:
Body: ASTM-A351 CF8/CF8M
Seat:Â PTFE,RPTFE,PPL
Stem: ANSI-304/ANSI-316
Seal:Â NBR,Viton,Fluororubber
Cap: PA6,ABS,stainless steel ASTM-A351 CF8/CF8M
Flange: DIN PN16, JIS 10K
Thread: BSP;BSPT;NPT;DIN;JIS;G;RC
Connection: threaded,flange,butt weld/socket weld/clamp(fast-installation)

Operation
angle seat piston valve is a pneumatically-controlled valve with a piston actuator providing linear actuation to lift a seal off its seat. The seat is set at an angle to provide the maximum possible flow when unseated. Angle seat piston valves are particularly suited to applications where high temperatures and large flowrates are required, such as steam or water. When used in reverse some models of angle seat piston valve will eliminate water hammer when operated.

Why choose us ?
We not only deisgn and manufacture valves, but also handling in valve mould tooling,design&development around Wenzhou.

*More complete drawing and technical specs pls contact us.

Â