High Efficiency 800kg Per Batch Heat Pump Fruit Dryer for Sale

Model NO.: JK03RD
Heat Energy: 25% Electricity+75% Air Source (Free)
Drying Temperature: 10~75c
Drying Capacity: 800 Kg Per Batch
Heating Capacity: 12~35kw
Cooling Capacity: 7.5~25kw
Dehumidify Amount: 12~100 L/H
Control: Touch Screen Control
Patent Technology: Second Waste Heat Recovery Technology
Trademark: KINKAI
Transport Package: Plywood
Specification: 1675x860x1280mm
Origin: China
KINKAI Heat Pump Fruit Dryer Introduction:
KINKAI third generation heat pump dryer is a device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical energy, as in a refrigerator, circulating hot-air assures uniform drying and high efficiency.

Model:  JK03RD, JK06RD, JK12RD
Power Supply:  220V/1PH/50HZ or 380V/3PH/50HZ
Type: 75% air source + 25% electric power
Max. Temp:  75ºC
Working Temp:  -10~45ºC
Functions:  Heating / Cooling / Dehumidify
Dryer Type:  Batch Type
 
KINKAI Heat Pump Fruit Dryer Working Principle
KINKAI heat pump dryer operates according to a basic reverse Carnot cycle. The working fluid(refrigerant) at low pressure is vaporized in the evaporator, by heat drawn from the dryer exhaust air. The compressor raises the enthalpy of the working fluid of the heat pump and discharges it as superheated vapor at high- pressure. Heat is removed from working fluid and returned to the process air at the condenser. The working fluid is then throttled to the low-pressure line(using an expansion valve) and enters the evaporator to complete the cycle. In the dryer system, hot and dry air at the exit of condenser is allowed to pass through the drying chamber where it gains latent heat from the material. The humid air at dryer exit then passes through the evaporator where condensation of moisture occurs as the air goes below dew point temperature. Then drain the condenser water.
High Efficiency 800kg Per Batch Heat Pump Fruit Dryer for Sale
Features of KINKAI Fruit Dryer:
1. Adopt close dehumidify + circulating drying type, saving operating cost;
Without waste gas and waste heat pollution, low noise
2. PLC + Touch Screen, operating easily; can setting different drying curve, Suitable for drying different materials.
3. Second waste heat recovery technology (patent)
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, the heat efficiency is high and energy is saved.
4. By using the forced ventilation function, there are the adjustable air distribution plates inside the oven. The materials can be dried uniformly.
5. The temperature: hot air heating 10-75°C, max 75°C.
6.  The baking plate dimensions and materials can customize as customer request.
7. During drying, the material does not craze, does not distortions, non-discoloring, never degenerate, non-oxidize, drying completely, with good dehydration, keep nutrient content;
8. Safe and reliable operation, automatic intelligent control, 24-hour continuous drying.
High Efficiency 800kg Per Batch Heat Pump Fruit Dryer for Sale

Technical Parameters of KINKAI Fruit Dryer
Double Dryers + Drying Chamber
Model Unit JK03RD (x2) JK06RD (x2) JK12RD (x2)
Power Input KW 9.6 17 30
Power Supply V/PH/HZ 380V/3PH, 50/60HZ 380V/3PH, 50/60HZ
220V/1PH, 50/60HZ
Rated Current A 19.2A(380V), 44A(220V) 34 60
Heating Capacity KW 21 42 84
Cooling Capacity KW 15.6 36 64
Dehumidify L/H 24 50 100
Max. Temperature ºC ≤75 ≤75 ≤75
Working Condition ºC 0-43 0-43 0-43
Electric Shock Protection Grade I I I
Max. Exhause Pressure Mpa 3 3 3
Noise dB(A) ≤75 ≤75 ≤75
Power Consumption/ H KWH 9.6 17 30
Electric Heater KW 6 12 24
Blowing Type / Horizontal Blowing 360ºC
Dimension Of Dryer MM 1675x860x1280 1760x1060x1280 2120x1360x1590
Weight KG 295x2 385x2 540x2
High Efficiency 800kg Per Batch Heat Pump Fruit Dryer for Sale
Recommend Dryer+Drying Chamber Sizes
Item Description Product Capacity Drying Chamber size
1 One unit JK03RD dryer + drying chamber 300Kg / batch 4000*2000*2200mm
2 One unit JK06RD dryer + drying chamber 600Kg / batch 6000*2800*2200mm
3 One unit JK12RD dryer + drying chamber 1000Kg / batch 6000*3000*2200mm
4 Two units JK03RD dryers + drying chamber 800Kg / batch 7000*2200*2200mm
5 Two units JK06RD dryers + drying chamber 1500Kg / batch 10000*2800*2200mm
6 Two units JK12RD dryers + drying chamber 2500Kg / batch 10000*3000*2200mm
Warm prompt: We can make any drying chamber sizes as your required

High Efficiency 800kg Per Batch Heat Pump Fruit Dryer for Sale


If you are interested in our heat pump dryer, please contact us for more information, such as catalogue, video,etc.
 
Meline
Add: Huadu District, Guangzhou City, Guangdong Province, P.R. China
Phone: +86-13697409461
 
 
 

 

Matting Agent For Water Based Coatings

Description



1, Water-based coatings are considered [green" or environmentally friendly as the VOC content is generally very low or negligible in quantity. Waterbased coatings can be applied over almost all ink types utilizing flexo/anilox, gravure, ink-train and roller coaters or variations of these. Waterborne products have also used in the industrial finishing of wood, plastic and metal substrates.


2, Silica Matting Agent specialized used for Matte/Semi-gloss waterbased Coatings. It provided high matting efficiency, excellent coating appearance and high transparency. As well as low oil absorption, easy dispersion and smoothly touch with minimal impact of viscosity. Generally, the untreated products provide highly effective matting at minimal addition levels, thus enabling the formulation of clear, low-gloss finishes with high transparency and chemical resistance properties.


Characters


1, Avoids coagulation of shear-sensitive binders; and reduced micro-foam generation and lower demand for anti-foam or defoamer additives.

2, Excellent Transparency. The refractive index of silica is comparable to most resin systems.

3, Surface smoothness and improvement in scratch resistance: These silicas have minimal effect on the physical properties, allowing development of smooth films with excellent hand-feel, scratch resistance and stain resistance.

4, Easy to Disperse: Advanced rubbing technology makes narrower distribution of diameter of granules, so that matting agent can be easily added in any production procedure and can be easily dispersed, which saves the processing time.


Application Fields


Water-based furniture paints, water-based wood decorative paints, water-based inks, water-based industrial paints.


Strengths


1, We are the leading raw material and technical solution provider to the Paint/Coating/Ink chemical Industry. We focus on Paint/Coating Market about 25 Years, with advanced technology and good experience to develop different kinds of silica matting agent used for different application.

2, We will continue to invest in research and development, application technology and production capacities in emerging markets.

3,We are the leading raw material and technical solution provider to the Paint/Coating/Ink chemical Industry. We focus on Paint/Coating Market about 25 Years, with advanced technology and good experience to develop different kinds of silica matting agent used for different application, such as Wood and furniture Coating, Industrial Coating, Coil Coating, automotive coatings and plastic coatings as well as printing inks, leather coating, textile coating and decorative coatings.


Matting Agent For Water Based Coatings,Carbon Black Matting Agent,Water-Based Matting Agent,Carbon Black Silica

Guangzhou Quanxu Technology Co Ltd , https://www.skychema.com