Unloader use matters needing attention 1. Connect the gas source interface, and check whether the interface is blocked by foreign matter, and ensure that the interface is clean and smooth; 2. Before using the star unloader, be sure that the rotation direction of the rotor is clockwise (view from the reducer out of the shaft end, which is consistent with the arrow on the sprocket cover); Leisuwash S90 Vehicle Wash System Leisuwash specializing in manufacture Automatic Car Wash Machine, Touchless Car Wash , Automatic Touchless Car Wash, touchless car wash equipment, robot car wash, smart car wash system, leisuwash 360, leisuwash leibao 360, laserwash 360, leisuwash touchless car wash machine, leisu wash touchless car wash automatic, leisu wash 360 high pressure touchless car wash equipment, robo car wash, touch free car wash, leisuwash 360 touch free car wash, leisuwash 360 price, automatic car wash price, leisuwash in malaysia, no touch automatic car wash machine, leisuwash 360 mini, leisuwash SG fully automatic car wash equipment.
Leisuwash S90 touchless car wash machine high intelligent high quality, with car wash + car care + drying process totally, each car wash takes time 1 minute to 5 minutes which depends on the car wash mode.
Leisuwash S90 Car Wash Machine is an entry level car wash unit, but you won`t find any low grade components and no cost cutting on the expense of quality. Each Leisuwash S90 is built by Leisuwash employees in accordance with our usual quality standards, the low price is achieved by high standardization and the use of proven technology. The Leisuwash S90 is for clients that need a wash machine at a competitive price with higher ROI. Auto Car Wash Machine,Automatic Leisuwash S90 Series,Leisuwash S90 Series Car Wash Machine,Automatic Leisuwash S90 Series Car Wash Machine Hangzhou Leisu Cleaning Equipment Co.,Ltd , https://www.sdleisuwashtouchless.com
3. Before using the star unloader, open the sprocket cover to check the tension of the chain. During the operation, check the chain periodically. Apply the appropriate grease to the chain and sprocket.
4. During the entire use of the unloader, it is advisable to adjust the pressure reducing valve so that the pressure at the seal is greater than the material pressure in the valve body of 0.05 MPa. The gas is oil-free and dry compressed air.
5. During the entire use of the star unloader, the gas source at the seal is always present, and the gas source can only be turned off after it is confirmed that the valve is out of service;