Compared with standard standing seam roof panel,nail strip standing seam roof is special.Usually the cliper is required while seaming the roof,while no cliper and seaming are required while install the nail strip standing seam roof.
It is fixed by screw after two sheeet joint.Nail Strip Standing Seam Forming Machine is continuous working,
the final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously.
Nail Strip Standing Seam Forming Machine Nail Strip Standing Seam Forming Machine,Profile Making Roll Forming,Seam Strips Lock Roofing,Aluminum Nail-Free Botou Golden Integrity Roll Forming Machine Co.,Ltd , http://www.jcxsteelrollformer.com
Performance
Comprehensive temperature and humidity Test                                 Â
Long time 85 °C / 85 % RH test
Temperature variation tests
Thermal cycle tests
Cold resistance tests
Storage with low-temperature
Main Technical Parameter
Model                 Â
TH-100
TH-225
TH-500
TH-800
TH-1000
Internal dimension (mm)Â Â Â Â Â Â Â Â Â Â Â Â Â Â
400*500*500
500*600*750
700*800*900
800*1000*1000
1000*1000*1000
Overall dimension (mm)Â Â Â Â Â Â Â Â Â Â
860*1050*1620
960*1150*1860
1180*1350*2010
1280*1550*2110
1500*1550*2110
Temperature range
-20ºC ~+150 ºC
Low type
: -40ºC  :-70ºC  : -86ºC
Humidity range
20% ~ 98% RH
Temperature fluctuations
± 0.5 ºC
Temperature deviation
± 2.0 ºC
Humidity deviation
± 2.5% RH
Heating rate
3 ºC / min
Cooling rate
1 ºC / min
Controller      Â
Programmable color LCD touch screen controller
PC Link, R-232 interface
Cooling system
Mechanical compression refrigeration system
Refrigerating unit
French TECUMSEH compressor
Exterior material
Steel Plate with protective coating
Interior material
SUS304 stainless steel
Power SupplyÂ
380V 50Hz
Service & Support                                      Â
Inquiry and consulting supportÂ
Offering quotation and brochure
Provide test solutions
Visiting our factory
Inspection and acceptance
3 years warranty support
lifelong follow-up services.
Instlation and trainingÂ
Response within 24 hoursÂ
Send engineers to customer place
Why Us                                            Â
Quality Guarantee Â
We control quality from the materials, electronic parts,accessories and many assembly parts of the products.Â
Third Party Inspection
All our test chambers accept third party inspection.
3 Years Warranty
Provide service of training, installation,operation and calibration, and engineers on site.
Professional Team
Our elite team provides professional solutions, right equipments, accurate answers to worldwide customers.
More Equipment                                           
Programmable laboratory cycle temperature and humidity Aging Tester
Performance
Comprehensive temperature and humidity Test                                 Â
Long time 85 °C / 85 % RH test
Temperature variation tests
Thermal cycle tests
Cold resistance tests
Storage with low-temperature
Main Technical Parameter
Model                 Â
TH-100
TH-225
TH-500
TH-800
TH-1000
Internal dimension (mm)Â Â Â Â Â Â Â Â Â Â Â Â Â Â
400*500*500
500*600*750
700*800*900
800*1000*1000
1000*1000*1000
Overall dimension (mm)Â Â Â Â Â Â Â Â Â Â
860*1050*1620
960*1150*1860
1180*1350*2010
1280*1550*2110
1500*1550*2110
Temperature range
-20ºC ~+150 ºC
Low type
: -40ºC  :-70ºC  : -86ºC
Humidity range
20% ~ 98% RH
Temperature fluctuations
± 0.5 ºC
Temperature deviation
± 2.0 ºC
Humidity deviation
± 2.5% RH
Heating rate
3 ºC / min
Cooling rate
1 ºC / min
Controller      Â
Programmable color LCD touch screen controller
PC Link, R-232 interface
Cooling system
Mechanical compression refrigeration system
Refrigerating unit
French TECUMSEH compressor
Exterior material
Steel Plate with protective coating
Interior material
SUS304 stainless steel
Power SupplyÂ
380V 50Hz
Service & Support                                      Â
Inquiry and consulting supportÂ
Offering quotation and brochure
Provide test solutions
Visiting our factory
Inspection and acceptance
3 years warranty support
lifelong follow-up services.
Instlation and trainingÂ
Response within 24 hoursÂ
Send engineers to customer place
Why Us                                            Â
Quality Guarantee Â
We control quality from the materials, electronic parts,accessories and many assembly parts of the products.Â
Third Party Inspection
All our test chambers accept third party inspection.
3 Years Warranty
Provide service of training, installation,operation and calibration, and engineers on site.
Professional Team
Our elite team provides professional solutions, right equipments, accurate answers to worldwide customers.
More Equipment                                          Â
Programmable Laboratory Cycle Temperature and Humidity Aging Tester
Model NO.: TH-800
Temperature Range: -40 Degree C~ +150 Degree C
Heating Rate: 3 Degreec / Min
Cooling Rate: 1 Degreec / Min
Controller: Programmable Color Display Touch Screen Controller
Cooling System: French Tecumseh Compressor
Exterior Material: Steel Plate with Protective Coating
Interior Material: SUS304 Stainless Steel
Trademark: LIB
Transport Package: Export Standard Wooden Box
Specification: 800 litres
Origin: China
HS Code: 8419899090
Model NO.: TH-800
Temperature Range: -40 Degree C~ +150 Degree C
Heating Rate: 3 Degreec / Min
Cooling Rate: 1 Degreec / Min
Controller: Programmable Color Display Touch Screen Controller
Cooling System: French Tecumseh Compressor
Exterior Material: Steel Plate with Protective Coating
Interior Material: SUS304 Stainless Steel
Trademark: LIB
Transport Package: Export Standard Wooden Box
Specification: 800 litres
Origin: China
HS Code: 8419899090
Programmable laboratory cycle temperature and humidity Aging Tester