Common valve materials commonly used austenitic stainless steel castings, forgings material casting chemical composition 0.8 ~ 2.0 GB / T 2100 GB / T 5613 GB / T GB / T ASTM A 351 / A 351M
Paver Brick Machine is Mainly used for pressing fly ash, river sand, sea sand, mountain sand, slag, slag, stone powder, cinder, coal gangue, tailings, slag, chemical slag, etc. as the main raw materials for non-burning bricks, steam-cured sand bricks, refractory bricks , Porous bricks, colorful pavement bricks and hollow brick production.The material common to many types of natural building are sand , cement, concrete, etc.Natural building tends to rely on human labor, more than technology. This Paver Brick Machine is very affordable for small scale enterprise. In other words, bricks or blocks produced by using this Paver Brick Machine are relatively cheap and affordable for those in the rural areas and for low income earners.
Paver Brick Machine,Paving Block Making Machine,Hydraulic Paver Block Machine,Automatic Paving Block Making Machine Gongyi Xiaoyi Jinwang Machinery Factory , https://www.jinwangmachines.com status Grade Chemical composition /% (except for the range given for the maximum) Reference Standard C Si Mn Cr Ni Mo Ti S P casting ZG03Cr18Ni10 0.03 1.5 17.0 ~ 20.0 8.0 ~ 12.0 - - 0.030 0.040 ZG08Cr18Ni9 0.08 8.0 ~ 11.0 - - ZG08Cr18Ni9Ti 0.08 - 5 (C-0.02) ~ 0.7 0.040 ZG12Cr18Ni9Ti 0.12 - 0.045 ZG08Cr18Ni12Mo2Ti 0.08 16.0 ~ 19.0 11.0 ~ 13.0 2.0 ~ 3.0 0.040 ZG12Cr18Ni12Mo2Ti 0.12 0.045 CF3 0.03 2.00 1.50 17.0 ~ 21.0 8.0 ~ 12.0 0.50 - 0.04 0.04 CF8 0.08 18.0 ~ 21.0 8.0 ~ 11.0 0.50 - CF3M 0.08 1.50 17.0 ~ 21.0 9.0 ~ 13.0 2.0 ~ 3.0 - CF8M 0.08 18.0 ~ 21.0 9.0 ~ 12.0 - CF8C 2.00 0.50 - Forgings F 304 0.08 1.00 2.00 18.0-20.0 8.0-11.0   0.030 0.045 ASTM A 182 / A 182M F 316 0.08 1.00 2.00 16.0-18.0 10.0-14.0 2.00-3.00  0.030 0.045 F 304L 0.030 1.00 2.00 18.0-20.0 8.0-13.0   0.030 0.045 F 316L 0.030 1.00 2.00 16.0-18.0 10.0-15.0 2.00-3.00  0.030 0.045 F 321 0.08 1.00 2.00 17.0-19.0 9.0-12.0  5C ~ 0.7 0.030 0.045 F 347 0.08 1.00 2.00 17.0-20.0 9.0-13.0   0.030 0.045 ã€Print】 ã€Close】 
Common valve materials commonly used austenitic stainless steel castings, forgings material casting chemical composition
Article Keywords:
More show news
[09-29] The Fifth Nuclear Power Plant Valve State Management Seminar was Held in Qidong [08-29] 2017 China (Wuhan) International Pump Valve Exhibition will be held from September 7 to September 9 at Wuhan International Expo Center [08-04] 2017 China International Petrochemical Technology and Equipment Exhibition will be held in Shanghai on August 23 [05-18] Shanghai International Tubing and Valve Exhibition will be held June 7-9 at the National Convention and Exhibition Center (Shanghai) [05-12] The First "Intelligent Technology Development Elite Market for Air Compressors" Successfully Held
More policies and regulations
[08-17] Heilongjiang sent an emergency notice: new house to be with gas cut off valve alarm [07-17] The new version of water pollution control law will be January 1, 2018 come into force [04-13] The Blue Book on Quality Management of Chinese Manufacturing Enterprises was released in Beijing [11-08] Common technical standards for foreign valve materials High-temperature steel parts for pressure parts, chemical composition requirements [11-07] China's first series of standards for electric water vapor thermal energy metering management system officially released
valve Valve ten brands Pump valve standard Valve business Internet + Valve busines