1. When rigs are used to lubricate sprocket, gears, chains, etc., and other long-term exposed locations, it is necessary to do a cleaning work on the smeared areas first, and to remove those silt and dirt. Remove grease before applying it. 2. When filling lubricating oil at the position where drilling rigs are frequently operated, it is necessary to fill the spigots around to see the lubricating oil. If you feel that the oil replenishment does not go in, you can try to move it. Just raise it later. 3. When applying lubricant to the wire rope of the drilling machine, it is best to heat the oil so that the lubricant can penetrate into the hemp core of the wire rope better. 4, when the replacement of lubricating oil can not be mixed, but also need to maintain the purity of the lubricating oil quality. 5. In the winter, when oil is added to the drilling rig, the lubricating grease will harden due to the temperature. Therefore, when adding a small amount of mechanical oil, it should be evenly mixed. 6. The oil gun used by the drilling rig should be selected to be propelled by a screw piston, because the pressure of the oil gun when adding the oil gun will be relatively large. Adding oil is also safe and reliable. So what role does lubricating oil play for drilling rigs? Because there is a lubricant film, this will effectively prevent direct contact between the metal surfaces of the various transmission components, which will reduce the frictional resistance and thus reduce wear. Now. When the various components of the drilling rig are operating at high speeds, it is due to friction that causes a lot of heat. If it is said that these hot gases are spread out, then the temperature will continue to rise and eventually it will cause drilling. The machine's parts were burned. Because drilling rigs work long-term under outcrop conditions, under the influence of environmental factors, they will result in the modification of metal parts, if it is applied on the metal surface layer of the drilling machine Fat, then it can play a rust-proof performance. Lower Bainite Steel Strips,Cold Roll Steel Strips,Plate Hr Steel Strip,Steel Strips For Saw Blade Jiangyin Mitoo Precise Co.,Ltd. , https://www.mitoosteel.com
