Multifunction Tools,Drill Tool,Laser Range Finder,Xiaomi Tool Box Shenzhen Newway Technology Co., Ltd. , https://www.newwayetechnology.com
1. Measuring range: Frequency: 10 ~ 300Hz
Amplitude: 0 to 200um 0 to 500um 0 to 800um (peak to peak)
Intensity: 0 ~ 20mm / s 0 ~ 25mm / s 0 ~ 50mm / s (true RMS)
2. Measurement accuracy: ±0.5, linear error ≤1%FS
3. Measurement method: vertical or horizontal
4. Output signal: current output: 4 ~ 20mA (load ≤ 1KΩ)
5. Ambient temperature: -10 ~ 65 ° C (relative humidity ≤ 85%)
6. Power supply voltage: DC24V (power consumption ≤ 3W)
7. Dimensions: 35 × 75 (mm)
8. Fixed screw hole: M10×1.5×10mm
STJ-SG-2HSTJ-SG-2H vibration sensor is also called magnetoelectric vibration speed sensor, which is mainly used for vibration monitoring of power plant generator sets, fans, rotating machinery, blasting, etc. It is also widely used in pile foundation detection and oil exploration, with wide frequency band. And the higher the false frequency, the tolerance of each parameter index is within ± 5%. Good stability, high precision, rich signal acquisition, double coil structure improves resistance to common mode interference, the coil can rotate freely within 360°, effectively eliminating surface wave interference. Therefore, the sensor has high signal-to-noise ratio, small phase difference, high dynamic resolution and strong temperature adaptability, and is suitable for seismic exploration in various environments. Mainly installed on the bearing caps of various rotating machinery, such as steam turbines, compressors, fans and pumps. It is an electromagnetic sensor that cuts magnetic lines by a moving coil and outputs a voltage. Therefore, it does not need to supply power and installation capacity when working.
HY-3V intelligent vibration monitoring and protection instrument, HY-3S intelligent speed monitoring and protection instrument, HY-3D intelligent travel monitoring and protection instrument, HY-5V intelligent vibration monitoring and protection instrument, HY-5S intelligent speed monitoring and protection instrument, HY-5D intelligent travel Monitoring and protection instrument, HY-6000 rotating machinery monitoring and protection combined device, HY-3500 steam turbine monitoring and protection combined device, HY-8500 vibration monitoring and fault analysis system, HY-VT vibration transmitter, HY-DT travel transmitter, HY -ST speed transmitter, VS-2 vibration speed sensor (magnetoelectric), VS-2 vibration speed sensor (piezoelectric), RS-1 speed sensor (passive), RS-1 speed sensor (active), RS -3 anti-speed sensor, CWY-DO point eddy current sensor, TD UT stroke sensor, UHZ-54 level sensor
Fan Vibration Meter Vibration Sensor STJ-SG-2HSTJ-SG-2H
The STJ-SG-2HSTJ-SG-2H vibration sensor, vibration sensor and vibration monitor can be used for continuous long-term monitoring and is suitable for measurement of mechanical vibrations such as steam turbines, fans, pumps and coal mills. The working principle is based on a primary component that converts mechanical energy into electrical energy. It is fixed on the bracket by two coils, and a magnetic steel in the middle is connected to the casing through a spring, and the magnetic steel moves in the line. The magnetic lines of force are cut, thus generating an induced electromotive force. The voltage is proportional to the speed of the casing, which is called the vibration speed sensor. The vibration sensor produced by Zhengzhou Hangke has small volume, good sealing and long service life. Due to the double coil structure, it can superimpose the effective signal, and the interference signal attenuation effectively improves the anti-interference ability.