Automatic underground cable pipe detector location system

•  Compass display: to display pipe position directly.
•  Left/right arrow indication: use the left/right arrow to indicate the pipe position when route tracing.
• Right/wrong indication: real-time test the pipe current direction to indicate tracing result and avoid the nearby lines interference.
• Real-time depth measure and current measure.
• History curve display: to display the signal variation directly.
• Cable Identification: Clamp (optional) identification and sensor identification. Clamp identification can precisely gives accurate result. sensor (optional) identification could be used when the Clamp identification is not applicable.
• Grounding fault location: Use the A frame (optional) to pinpoint the pipe insulation damaged points against the ground. No need to do zero set and the arrow will point to the fault point direction.
•  Digitization high accuracy sampling and processing,narrow receiving pass band to rise the anti-interference capability and suppress power interference and harmonic interference from nearby running cable and pipe.
• Multiple locating frequency: active detection and passive detection.
• Multiple signal output mode: Direct connection output, Clamp Coupling input, Radiation output.
• Big capacity Li-on batteries series,support auto power off when low battery or long time no operation
• Solid case and light weight easy to carry  

1.1.1 Transmitter:

•  Output: Direct Connection output, Clamp Coupling Output (optional), Radiation output.
•  Output Frequency:
•  640Hz (complex frequency), 1280Hz (complex frequency), 10kHz, 33kHz, 83kHz.
•  Output power: max. 10W, 10 levels adjustable, auto impedance matching.
•   Direct connection voltage: max. 150Vpp.
•   Overload and short circuit protection.
•  HMI: 128X64 LCD.
•  Power supply: 4 X built-in 18650 Li-on batteries, standard 7.4V, 6.8Ah

1.1.2 Receiver:

•  Input: Internal receiving loop, Clamp (optional), sensor (optional),fault locating A Frame (optional).
• Receiving frequency:

        - Active frequency: 640Hz,1280Hz,10kHz,33kHz,83kHz

        - Power frequency: 50Hz/60Hz,250Hz/300Hz

        - Radiation frequency passive frequency: center frequency 10kHz, 33kHz, 83kHz  

•  Pipe detection mode: wide peak method,narrow peak method,valley method
•  Cable identification mode: Receiving Clamp (optional) intelligent identification and sensor (optional) identification
•  HMI: 320X240 LCD
•  Built-in battery: 2 X 18650 Li-on batteries, standard 7.4V,3.4Ah

1.1.3 Other:

•   Volume: transmitter 270x220x85mm,receiver 700x270x120mm
•   Weight: transmitter 2.2kgs, receiver 2.2kgs
•   Charger: input AC 100~240V,50/60Hz,output DC8.4V,2A
•   Temperature: -10-40ºC,humidity 5-90%,elevation <4500m

•  Compass display: to display pipe position directly.
•  Left/right arrow indication: use the left/right arrow to indicate the pipe position when route tracing.
• Right/wrong indication: real-time test the pipe current direction to indicate tracing result and avoid the nearby lines interference.
• Real-time depth measure and current measure.
• History curve display: to display the signal variation directly.
• Cable Identification: Clamp (optional) identification and sensor identification. Clamp identification can precisely gives accurate result. sensor (optional) identification could be used when the Clamp identification is not applicable.
• Grounding fault location: Use the A frame (optional) to pinpoint the pipe insulation damaged points against the ground. No need to do zero set and the arrow will point to the fault point direction.
•  Digitization high accuracy sampling and processing,narrow receiving pass band to rise the anti-interference capability and suppress power interference and harmonic interference from nearby running cable and pipe.
• Multiple locating frequency: active detection and passive detection.
• Multiple signal output mode: Direct connection output, Clamp Coupling input, Radiation output.
• Big capacity Li-on batteries series,support auto power off when low battery or long time no operation
• Solid case and light weight easy to carry  

1.1.1 Transmitter:

•  Output: Direct Connection output, Clamp Coupling Output (optional), Radiation output.
•  Output Frequency:
•  640Hz (complex frequency), 1280Hz (complex frequency), 10kHz, 33kHz, 83kHz.
•  Output power: max. 10W, 10 levels adjustable, auto impedance matching.
•   Direct connection voltage: max. 150Vpp.
•   Overload and short circuit protection.
•  HMI: 128X64 LCD.
•  Power supply: 4 X built-in 18650 Li-on batteries, standard 7.4V, 6.8Ah

1.1.2 Receiver:

•  Input: Internal receiving loop, Clamp (optional), sensor (optional),fault locating A Frame (optional).
• Receiving frequency:

        - Active frequency: 640Hz,1280Hz,10kHz,33kHz,83kHz

        - Power frequency: 50Hz/60Hz,250Hz/300Hz

        - Radiation frequency passive frequency: center frequency 10kHz, 33kHz, 83kHz  

•  Pipe detection mode: wide peak method,narrow peak method,valley method
•  Cable identification mode: Receiving Clamp (optional) intelligent identification and sensor (optional) identification
•  HMI: 320X240 LCD
•  Built-in battery: 2 X 18650 Li-on batteries, standard 7.4V,3.4Ah

1.1.3 Other:

•   Volume: transmitter 270x220x85mm,receiver 700x270x120mm
•   Weight: transmitter 2.2kgs, receiver 2.2kgs
•   Charger: input AC 100~240V,50/60Hz,output DC8.4V,2A
•   Temperature: -10-40ºC,humidity 5-90%,elevation <4500m

Idler Roller

Product Scope:

Dia (mm): 63.5, 76, 89, 102, 108, 114, 127, 133, 140, 152, 159, 168, 178, 194, 219
Length (mm): 170-2800
Executive Standard: GB/DIN/CEMA/SABS/JIS
Advantage: Our rollers enjoy minimum revolving resistance, low vibration and noise, good concentricity, long lifetime, low maintenance cost and high loading capacity.

Material:

Tube: High-precision ERW, welded with DIN2394 Standard
Shaft: Cold drawn steel in accordance with DIN17100 and other equivalent standard, ISO h6 precision
Bearing housing: Cold pressing working, ISO M7
Seals: Labyrinth seal, Nylon 6
Bearing: Deep groove ball bearing C3 clearance
Painting: Ordinary painting, hot galvanized painting, electric static spraying painting, baked painting, Epoxy painting

Idler Roller,Rubber Disc Roller,Impact Cushion Roller,Conveyor Rollers Return Roller

Hebei Juxin Conveyor Engineering Co., Ltd , https://www.jxconveyor.com