An all-purpose cleaner is a cleaning solution that can be used to clean various surfaces and materials in a household. It is formulated to remove dirt, grime, and stains from surfaces such as floors, walls, countertops, and appliances. All-purpose cleaners are typically made with a combination of surfactants, solvents, and other cleaning agents that are effective on a wide range of surfaces. They can be used on both hard and soft surfaces, and are often sold in spray bottles for easy application. Some all-purpose cleaners are also formulated to disinfect surfaces and kill germs and bacteria.
All Purpose Cleaner is a highly effective and powerful universal cleaner with lemon fragrance and the ability to naturally dissolve oil. It is widely used for cleaning and cleaning in kitchens, bathrooms, hotels, etc. It can clean carpets, bathtubs, closestool, kitchenware, etc. without damaging the surface gloss, and plays an efficient maintenance role. Scope of application: kitchenware, bathtub, toilet; Ceramic tile wall; Kitchen top; Wallpaper, stainless steel, leather sofa, stone surface, aluminum plate, paint exterior wall, engine oil stain and carbon stain.
All Purpose Cleaner,Multi-Purpose Cleaning Spray,Computer Screen Cleaning Spray,Phone Screen Cleaner Spray Jiangyin yinghuameng Houseware Co.,Ltd. , https://www.care-guys.com
No.
      item
Parameter(all is subject to our final design)
1
 Suitable raw material
Type
Common galvanized
Yield strength
235MPa(or other high strength steel)
Thickness(mm)
0.4-1.2
width(mm)
According to final design
2
Manual uncoiler's capacity
5tons
3
Forming speed(m/min)
About 15-22m/min
4
Main motor power(KW)
7.5kw
5
Hydraulic power(KW)
3kw
6
Forming roller groupsÂ
Around 16-18  groups
7
Raw material of forming roller
High quality No.45 steel
8
Raw material of cutting blade
Cr12mould steel with quenched treatment
9
controlling system
Mitsubishi PLC& converter
10
Suitable industrial voltage
 According to your special requirement
11
Machine dimensions(L*W*H)
6.8m×1.8m×1.52m
12
Machine weight
About 5~7tons
Uncoiler, coil sheet flattening equipment, hole punching department, C/Z shap main forming system, cutting deparment, hydraulic station, PLC control table, final product run out table.
Main technical parameter:
-Suitable raw meterial: Cold rolled strip or heat-treated galvanized steel strip
-Suitable thickness: 1.5-3.0mm
-Forming speed: About 10-12m/min
-Main motor power: 15kw; Hydraulic power: 5.5kw(depend on final design)
-Voltage: 380V, 3 phase, 60HZ or at buyer's requirment
-PLC control and transfered by chain
-Machine's dimension: About 18m*1.8m*1.6m
Meterial of main department:
-Forming roller: Cr15 bearing steel with quenched treatment
-Cutting blade: Cr12 mould steel with quenched treatment
Working flow:
Uncoil the strip-guiding and flattening the sheet-hole punching-main roll forming-cutting-final products run out to table
Metal C Z Purlin Rolled Forming Machine
Model NO.: purlin roll forming machine
Certificate: ISO9001:2000/CE
Power Source: Electric
Feature: Automation
Advantage: Simple Structure
Warranty: 24 Months
Forging Forming Method: Mold Forging
Suitable Material: Q235, Q345, G550 for Gi, PPGI, Gl, PPGL
Suitable Thickness: 0.4mm~0.7mm
Machine Type: Cold Roll Forming Machine
Final Product: Metal Tile, Roof Tile, Corrugated Sheet, Purlin
Trademark: STW
Transport Package: Machine in 40′′gp,Other Accessories in Wooden Case
Specification: CE
Origin: China
HS Code: 84552210
Machine Specification