Why is the price of propylene glycol inconsistent with the main raw material prices have been seriously inverted

In the past three years, the sales price of domestic 1,2-propanediol (hereinafter referred to as propylene glycol) has stagnated. The average selling price in 2003 was 7581.17 yuan (t price, the same below), and in 2004 it was 8347.65 yuan. In the first half of 2005, 9995.47 yuan. The price of propylene oxide, the main raw material for the production of propylene glycol, has taken three major steps in three years. The average selling price has increased from 6,843.12 yuan in 2003 to 12,446.16 yuan in the first half of this year. . This situation of severe price inversion not only caused domestic manufacturers to suffer tragic economic losses, but also impacted the domestic propylene glycol industrial chain economy.
Propylene glycol is a promising product and its main use is as an intermediate for coatings and reinforced plastics in the production of unsaturated polyester resins. Due to its low toxicity, wettability and excellent dissolution properties, propylene glycol is widely used in food, medicine and cosmetics and is used as a tobacco wetting agent, small animal food, plasticizer for plastics and special plasticizers. Recently developed new uses for liquid detergents. Moreover, with the development of the national economy, the output of unsaturated polyester resin products is only increasing by 10% to 20% annually. This increase in demand for propylene glycol will inevitably grow at the same rate. At present, the apparent consumption of propylene glycol in China is around 100,000 tons per year. The output of domestic enterprises is about 60,000 tons, with a market gap of about 40,000.
Domestic industry analysts believe that the price of propylene glycol deviates from the norm, which is due to the serious dumping of foreign manufacturers. Its characteristics: First, dump sales. Due to the large scale of production of foreign manufacturers and the relative surplus of production capacity, they are naturally increasing their sales volume in the face of China's 40% annual demand deficit. The second is low dumping prices. For example, in the Zhangjiagang port of Jiangsu, the foreign manufacturers' arrival price is only about 11,000 yuan/ton, which is much lower than the selling price of similar products of domestic manufacturers, and far lower than the production cost of propylene glycol itself. From the aspect of production technology, domestic and foreign manufacturers mostly use the transesterification method for their production process, and the main raw materials are all propylene oxide, so the cost of factories at home and abroad is almost the same. Taking the average selling price of propylene oxide of 12,446.16 yuan in the first half of 2005 as an example, the cost of producing propylene glycol plants is at least 14,000 yuan in tax. However, foreign manufacturers have a tax of 11,000 yuan in Hong Kong, and after deducting the related taxes, the port price is only around 9,000 yuan, which is lower than the domestic factory cost of 5,000 yuan.
Propylene glycol and dimethyl carbonate are co-products, that is, the production of 1 ton of dimethyl carbonate produces 0.84 tons of propylene glycol. Its main raw material, propylene oxide, is a petroleum cracking product. With the current high international oil prices, the cost of dimethyl carbonate and propylene glycol will also be maintained at a relatively high price. In recent years, domestic manufacturers have continued to carry out technological innovation through strict management and management, and the processing fee has dropped to the bottom line. In the propylene glycol plant cost, the processing fee per ton is nearly 1,000 yuan, which is less than 7% of the factory cost of 14,000 yuan, and the required raw material propylene oxide is 13,000 yuan per ton, accounting for about 93% of the factory cost of 14,000 yuan. The price of propylene oxide rises as oil prices continue to rise. Therefore, the price of propylene glycol should go up. However, due to the large number of foreign manufacturers dumping in recent years, leading to the simultaneous linkage of domestic propylene glycol prices. As a result, the production and operation of propylene glycol and its related industries are struggling. Finally, dimethyl carbonate and its related industries will also be affected.
If foreign propylene glycol is allowed to be dumped at a low price of 11,000 yuan in the country, it will seriously hinder the development of the domestic propylene glycol industry, and it will also seriously hinder the development of domestic dimethyl carbonate, a good new product. According to sources in the industry of dimethyl carbonate, from 2001 to the present, the annual actual amount of dimethyl carbonate in China is increasing at a rate of 10%, and the actual amount in the future will be much larger than the rate of 10%. The real purpose of low-cost dumping abroad is not to provide our country with inexpensive products. Its ultimate goal is to monopolize our country's market and squeeze domestic propylene glycol and its related industries.
In order to protect the healthy development of the domestic propylene glycol industry, industry-related companies called for the initiative to set up China's propylene glycol industry association as soon as possible, and regularly hold seminars on technological innovation and production and operation in the propylene glycol industry to seek common development and substantially resist operational risks. It actively collects first-hand sources of dumping and damage caused by foreign companies and seeks support from government agencies.

Desktop Roll Materials Cutting Machine

Flying Man Desktop Roll Materials Cutting Machine

FMHZ desktop cutting machine, Automatic Roll to Sheet Cutting Machine: small body with powerful function, one machine multi-purpose; Economical small cutting machine; Cutting accuracy up to 0.1mm; This automatic cutting machine can be used for non-woven fabric cutting, wall paper cutting, PVC film cutting, reflective film cutting, copper foil cutting, aluminum foil cutting, glass cloth cutting, fiber cloth cutting, mobile phone film cutting, plastic slice cutting, bubble film cutting, flannelette cutting, etc.

Automatic Cutting Machine Detail 2
This cutting machine has different models#FMHZ-400/FMHZ-500/FMHZ-600/FMHZ-700, cutting width from 1mm to 700mm, cutting thickness is different. The maximum cutting thickness is 0.8mm.

Application1

This machine is also known as non-woven fabric cutting machine, wall paper cutting machine, PVC film cutting machine, reflective film cutting machine, copper foil cutting machine, aluminum foil cutting machine, glass Cloth Cutting Machine, fiber cloth cutting machine, mobile phone film cutting machine, plastic slice cutting machine, bubble film cutting machine, flannel cutting machine, etc.

Rolling Fabric Cutter,Fabric Cutting Machine,Aluminum Foil Cutting Machine,Desktop Roll Materials Cutting Machine

Suzhou Flying Man Assembly Automation Co., Ltd. , https://www.flyingmans.com