How to use CNC machine tools scientifically to maximize its role and improve economic efficiency is a new topic for every CNC machine tool user. Through practice, the author believes that to scientifically use CNC machine tools and improve the economic benefits of enterprises, we must pay attention to the following aspects. The main reasons for the poor utilization of CNC machine tools are: (1) The equipment is not properly selected, the quality is not good, and the enterprise does not carry out improvement or transformation. Therefore, blindness should be avoided when selecting a CNC machine model. Try to consider investment efficiency, economy and price ratio as much as possible. Choose equipment that meets the requirements for performance and accuracy. If the accuracy is too high or the performance is redundant, the equipment resources will be wasted, which will increase the economic burden of the enterprise. (2) Although the quality of the equipment is good, the performance of the CNC machine tool is not in line with the production requirements of the enterprise, and it cannot be used or the utilization rate is very low. When selecting the model of the CNC machine tool, one-sidedness should be avoided. Don't overdo it. (3) Although the equipment can be used, the number of the same type of equipment is too large, and it is not compatible with other equipments; or the CNC system of different manufacturers is not uniform, and the specifications are not matched, resulting in poor technical backup support. The results are very difficult to use, programming, repair, accessories and tool supply. (4) Since the equipment is not used, the equipment cannot function properly and must be discarded. Imagine that the company purchases a more complex, fully functional, and more advanced CNC machine tool. If there is no suitable person to operate and use it, there is no skilled maintenance worker to repair and repair. No matter how good the machine tool is, it is impossible to use it. It also does not play its due role. For example, if a company purchases two SIMENSS5-115U CNC machine tools, it does not train qualified operators in time, and sends three non-operators to learn the operation programming technology. The results can not be operated back, making the machine "idle" for a long time. , causing a lot of waste. Therefore, the selection and training of numerical control technicians is one of the effective ways for enterprises to use numerical control technology, improve equipment use efficiency and give full play to equipment efficiency. It is also the key to manage, use and repair CNC machine tools. (Finish) Artware Ceramic And Health Care Ceramic Artware Ceramic And Health Care Ceramic,Artware Ceramic,Health Care Ceramic,Health Ceramics Yixing Xiangyang Jiujiu Chinaware Industry Co., Ltd. , https://www.xyjjceramic.com