Recently, Hankook Tire announced its global sales performance in 2008, and achieved sales of 4.07 trillion won (US$3.7 billion) in the year, an increase of approximately 26% year-on-year (based on the Korean won). In the ups and downs of 2008, Hankook Tire maintained strong growth momentum, reaching the target of 3.9 trillion won at the beginning of the year, and achieved an increase of 5.1% on this basis. At the same time, Hankook Tire's core business in major global markets has achieved significant growth: Russia's market sales increased by 98%, and Central American and South American market sales increased by 50%. Through continuous development of market channels, Hankook Tire Co., Ltd. actively cooperates with automobile manufacturers to promote the sales of strategic products, ultra high performance (UHP) tires, which have ensured the continuous development of Hankook Tire. It is worth noting that Hankook Tire Ultra High Performance (UHP) tires achieved a stable growth rate of 35% in 2008. Among them, the fastest increase in sales was in Europe, reaching 48%, followed by Latin America, Asia, and the Middle East, where sales increased by 27% and the US market increased by 21%. In addition, ultra-high performance (UHP) tires achieved a 42% performance improvement in the matching market. For the sales performance of ultra-high performance (UHP) tires, Han Cheng Tire President and CEO Xu Chenghe said: “The good performance of the performance has benefited from our cooperation with more and more auto manufacturers and related industry chains. This partnership helps us to continuously improve our product quality and technical standards. We will create more high-quality high-performance products for consumers through our core technology concept, Kontrol Technology." Hankook Tire is still optimistic about the market outlook for the new year, and the company has set its global sales target for 2009 at 4.33 trillion won. This goal shows that Hankook Tire will continue to invest in technology, brand image, and consumer demand in the economic year of 2009. PTA Powder
Main application:Repair and
strengthen workpiece surface, significantly
Welding method:PTA welding
Main equipment:PTA welding
machine
Flame core temperature: about 10000℃
Technological characteristics:PTA has high
temperature, concentrated energy, stable combustion, small heat affected zone,
fast welding speed, high production efficiency, easy to obtain low dilution
rate of surfacing layer, surfacing layer and workpiece matrix are metallurgical
bonding,, bonding strength is high.
PTA welding technology is one of surface
strengthening methods, which has high deposition rate, low dilution rate, and
could be applied with many kinds of powder. The manufacturing craft of PTA
powder is normally gas atomization, which reduces satellite of powder. We
supply 4 main categories of PTA powder: Nickel-based alloy powder, Iron-based
alloy powder, Cobalt-based alloy powder and Mixed Powder.
Nickel Based Alloy Powder possesses high
temperature resistance and wear resistance, it is the most popular alloy powder
applied by PTA welding both domestically and internationally. Coating hardness
is within the range of HRC 30-60. It could be applied to various industries
like agriculture, plastic, paper, marine and steel making where wear and
corrosion protection needed. Some examples are plunger, moulds, pump leaf and
screw.
Iron Based Alloy Powder is more widely used
and a more economic choice. With high abrasive resistance, it is more commonly
applied to mining tools, drilling tools and mixers of iron and steel making
industry, coal industry, shaft, oil and energy industry.
Cobalt Based Alloy Powder is recommended
for corrosion and oxidation resistance, with better hot hardness values than
equivalent Nickel based alloy powder. It is widely applied to steel making
industry, coal industry and mining industry.
Mixed powder mainly refers to NiCrBSi
mixing with other hard-phase powder such as cast tungsten carbide and other cemented
alloy powder, which allows the powder better hardness around HRC60 and
excellent abrasion resistance.
Mixed powder is more often used for mining
equipment for oil sands, lignite, oil drilling tools, excavator buckets,
extrusion screws for plastic processing, grain and oil processing, etc.
PTA Powder,Iron Based Alloy Powder,Cobalt Based Alloy Powder,Nickel Based Alloy Powder Luoyang Golden Egret Geotools Co., Ltd , https://www.xtchvof.com