Hot Selling Package Industrial Air Cooled Water Chiller

Model NO.: HLLA-03SI~45TI

Application Fields: Chemical

Application Machine: Machining Center

Certification: CE

Condition: New

Cooling Capacity: 7.9kw-118.8kw

Refrigerant: R22, R407c

Power Supply: 380V-3-pH-50Hz

Evaporator: Shell and Tube Type

Power Input: 3.85kw

Compressor Type: Scroll Type

Power Source: Electrical

Noise Db(a): 72

Chilled Water Flow: 26.4m3/H

Trademark: Golden

Specification: CE

Origin: Dongguan, Guangdong

HS Code: 8418692090
Hot Selling Package Industrial Air Cooled Water Chiller

1. The chiller adopt high-quality compressor and Italy pump, so it is very sate and noiseless, economical in power and durable
2. The chiller is deployed with Italy temperature controller, it can control the temperature between 3 and 35 degrees exactly
3. The designs of chiller and radiator are unique, so the heat exchange efficiency is very high
4. The chiller is designed to be with current over-load protector, high voltage and low voltage construction and electric time-delay safeguard, when malfunction happened, it could alarm and show the cause of the problem in time.
5. It has stainless steel temperature-holder box, it is very convince to purify
6. It is designed to be with anti-phase & lack-phase protector and anti-icy protector
7. The temperature of ultra cod chiller can be below -15 degrees.
8. This series chiller can customize base on the requirement of acid resistant & acidity-resistant
9. It has got CE certification.

Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â IndustrialÂ Air-cooledÂ WaterÂ Â Chiller

Â Â Â Â Â Â Â ModelÂ Â Â Â Â Â HLLA~ 03S 05S 08S 10S 12.5S 15S 20D 25D 30D 40T 45T

RatedÂ CoolingÂ Capacity Ã— 1000kcal/h 6.8 11.1 17.3 23.4 27.1 34 46.8 54.2 68.1 81.3 102.1

KW 7.9 12.9 20.1 27.2 31.5 39.6 54.5 63.0 79.2 94.5 118.8

Â Â lnputÂ powerÂ (KW) 3.02 4.62 6.75 8.7 9.8 13.8 17.4 19.6 27.6 29.4 41.4

Â Ã— Â Comp. Â lnputÂ PowerÃ— QtyÂ (KW) 2.5Ã— 1 4.1Ã— 1 6.1Ã— 1 7.5Ã— 1 8.6Ã— 1 11.8Ã— 1 7.5Ã— 2 8.6Ã— 2 11.8Ã— 2 8.6Ã— 3 11.8Ã— 3

Â Comp. Â CurrentÂ (A) 5.7 9.2 13.5 17.6 19.3 26.7 35.2 38.6 53.4 57.9 80.1

Â RefrigerantÂ Â R22

Â Â PowerÂ SupplyÂ 440V/Â 3ph/Â 60Hz

Â SafetyÂ Protection , Â , Â , Â , Â , Â , Â
PhaseÂ reversionÂ protection, Â PhaseÂ lackÂ protection, Â OverloadÂ currentÂ protection,
DischargeÂ airÂ temp. Â Â protection, Â LowÂ & Â HighÂ pressureÂ protection, Â Hi/Â LowÂ temp. Â Â protection, Â WaterÂ flowÂ protection.

Â Â NumberÂ ofÂ RefrigerationÂ Circuit 1 2 3

Â CapacityÂ ControlÂ (%) 0, Â 100 0, Â 50, Â 100Â Â Â Â Â Â Â Â Â Â Â 0, Â 33, Â 66, Â 100

Â Condenser Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â RippleÂ AluminumÂ FinsÂ aroundÂ CopperÂ Pipe

Â Â PowerÂ lnputÂ ofÂ FanÂ (KW) 0.52 0.52 0.65 1.2 1.2 2 2.4 2.4 4.0 3.6 6.0

Â Evaporator Â ShellÂ andÂ TubeÂ Type

Â WaterÂ SideÂ MaxÂ PressureÂ (MPa) 1

Â Â Dia. ofÂ PipeÂ toÂ EvaporatorÂ (inch) 1-1/2" 1-1/2" 1-1/2" 1-1/2" 2" 2" 2" 2" 2-1/2" 2-1/2" 2-1/2"

Â Â ChilledÂ WaterÂ FlowÂ (L/m) 23 37 58 78 90 113 156 181 227 271 340

Â EvaporatorÂ WaterÂ PressureÂ dropÂ (kPa) 13 14 17 23 28 30 28 28 32 32 31

Â RunningÂ NoiseÂ dB(A) 72 72 73 75 75 75 75 75 75 75 75

Â TotalÂ weightÂ (kg) 130 170 370 400 450 540 760 800 1000 1200 1400

Â
Carbide Drag Bit
Carbide Drag Bit is manufactured by casting high quality alloy steel and premium tungsten carbide insert, plus state of art welding technology and multiple precision heat treatment to provide highest penetration rate and longest life span at roughest condition. Widely used in the soft formation, such as sand, clay, and also some soft rocks in water well drilling and mining construction. We can supply carbide drag bit with step type and chevron type, carbide drag bit we have 3", 3 3/4", 3 7/8", 4 3/4", 4 5/8", 5 7/8", 6", 6 1/4", 6 1/2", 7 7/8", 8", 8 1/2", 9 7/8" with API standard thread. Except API thread carbide drag bit, we can also supply carbide drag bit with female thread, such as geological 50mm female thread, 2 3/8 reg female thread, 2 3/8 IF female thread etc. If you want high quality carbide drag bit from a water well drilling bit manufactuer with competetive price, welcome to contact us. What we can do is to provide carbide drag bits with different sizes and competetive price.
Carbide Drag Bit,Wing Carbide Bit,Step Chevron Drag Bit,Step Drag Bit For Well Drilling
Xi'an Heaven Abundant Mining Equipment CO.,LTD , https://www.tydrillingbits.com