The main ex-factory prices of steel mills are mainly falling

On the 7th, there were 9 major steel mills in the country that issued price adjustment information. The number of price-adjusting steel mills decreased sharply from the previous day, prices continued to fall, and individual prices rose. Adjustments ranged from 200 yuan/ton to 10 yuan/ton. . Among them, the reduction in the ex-factory price of construction steel products has significantly contracted, and the decline in sheet prices has increased.

Among them, five of the above-mentioned steel mills adjusted the ex-factory price of construction steel products, and the prices fell more and less, ranging from a downward adjustment of 37 yuan/ton to a rise of 10 yuan/ton, with a significant contraction from the previous day. At the same time, three of the above-mentioned steel mills adjusted the ex-factory prices of sheet metal products, and the prices continued to fall, falling by 50-200 yuan/ton, with a significant increase. In addition, there are two steel mills to adjust the ex-factory price of profile products, prices fell, the range of 20-60 yuan / ton from the construction steel point of view, this time the price adjustment of steel mills are mainly concentrated in East China, South, South China, North China Northwest, northeast and other places. Concretely speaking, the ex-factory prices of construction steels of major steel mills in the above regions were mainly adjusted downwards, rising by a few at RMB 10-30/ton, up RMB 10/ton; among them, the Anyang Steel Company in the Central South Region raised its Φ6.5mmQ235 high line. 10 yuan/ton.

Among the major varieties of building materials, there are a large number of steel mills with Φ6.5mmQ235 high-line price adjustment, and the others are less, but the prices are mainly falling. Among them, the Φ6.5mmQ235 high-line ex-factory price reduction in the range of 10-37 yuan / ton, the increase rate of 10 yuan / ton; HRB335Φ20mm rebar factory price reduction in the range of 20-32 yuan / ton; HRB400 plate screw Φ8-10 ex-factory price The downward adjustment is at RMB 20/t.

On the sheet side, yesterday, three steel mills adjusted the ex-factory price of sheet products and the price continued to decline. Among them, the new steel in East China respectively lowered the price of its Q23520mm Puzhong plate and SS4.75mm general price plates by RMB 200/tonne and RMB 150/tonne; the price of the Q23520mm Puzhong plate was lowered by RMB 90/ton in the Anyang Iron and Steel Company in Central South China. The Northwestern region's Xining in Jiuquan lowered the price of its Q23520mm Puzhong board by 50 yuan/ton.

In addition, the Anyang Iron and Steel Company in Central and South China reduced the ex-factory price of its 5# angle steel and 16# channel steel by RMB 60/t; Tianjin Jiangtian in North China lowered the ex-factory price of its 16# channel steel and 25# beam steel by RMB 30/t and RMB 20 respectively. /Ton.

Affected by the slowdown in the decline in the ex-factory prices of the mainstream steel products, the confidence in the spot market has recovered. At the same time, Spiral rebounded slightly for two days in a row. It has some support for the market in the short term. However, the current market turnover remains depressed and the spot market performance remains unchanged. Weak.

In respect of building materials, yesterday's snail rebounded slightly, and the spot market has seen some improvement. Data show that on the 7th, the average price of HRB40020MM rebar in 25 major national markets fell by RMB 12/t from the previous day, and the decline slowed down. Among them, Shanghai fell; Beijing and Guangzhou remained stable; on the 7th, the average price of the 6.5mm high line in the 24 major markets across the country remained unchanged from the previous day, and all the mainstream markets stabilized.

As regards sheet, the market remained flat and the overall decline was still modest. The data shows that the average price of 20mm plate in the 23 major markets across the country fell by RMB 8/t from the previous day on the 7th, and the decline has significantly contracted from the previous day. Among them, the mainstream market remained stable, and Tianjin fell by 30 yuan/ton. On the 7th, the average price of Q235B4.75mm hot coils in 24 major markets across the country fell by 5 yuan/ton from the previous day, with the same decline as the previous day, and the mainstream market remained stable.

The profile market continued its downward trend, but the decline was modest. According to the data, the average prices of 50*5 angle steel, 16# channel steel and 25# I-beam in some major national markets fell by RMB 9,6, and 3/ton respectively from the previous day on the 7th, with a slight contraction from the previous day. Shanghai, Beijing and Guangzhou all remained stable, with Tianjin falling by RMB 30/t.

According to data from the China Steel Association, the average daily crude steel production in the country in July was 1.9494 million tons, a decrease of 2.2% from the mid-July. Although the output of crude steel has declined, but the rate is relatively limited, and the current market turnover is still not satisfactory, the market is still not optimistic about the outlook is expected, the short-term steel factory prices are expected to continue to fall mainly.