Bohai Highway Guardrail Forming Machine for Construction

Model NO.: BH-HG
HS Code: 8455229090
Profile drawing
Bohai Highway Guardrail Forming Machine for Construction


Main parameter

1.       Specification of rolling material: Width: 480mm; Thickness:3-4mm;        Q235A Galvanized steel sheet.
2.       Working speed: 10 -12m/min
3.       Roller steps: 13 pairs main rollers & 7 pairs flattening rollers
4.       Material of roller: GCr15 bearing steel, quenched, HRC58°-62°
5.       Material of main shaft: superior 45# steel, tempered.
6.       Diameter of main shaft: ¢85 mm
7.       Main motor power: 35 kw
8.       Transmission:double-row chain drive
9.       Structure of forming machine: wallboard
10.     Flattening motor power: 2.2 kw
11.     Hydraulic motor power: 11 kw, Pressure: 20 Mpa
12.     Material of Punching and Cutting mould:Cr12
13.     Cutting blade heat-treated.:HRC58°-62°
14.     Punching and Cutting Way:Adopt hydraulic driving, flat panel punching, cutting after roll forming.
15.     Electric control system: whole machine adopts PLC frequency control, Cut-to-length error≤±2mm
16.     Machine dimension:13500mm×2700mm×1600mm


Equipment configuration

Manual Feeding device (3 T capacity), transmission, flattening device, before-punching device (2 sets), main machine and roller (including guide table), cutting (after roll forming) device, hydraulic system, electric control system, run out table, etc.



Technological process figure
Bohai Highway Guardrail Forming Machine for Construction

 

Aluminum Electric Wheelchair

Aluminum Electric Wheelchair,Electric Wheelchair Pricing,An Electric Wheelchair,Aluminum Wheelchairs

Ningbo Baichen Medical Devices CO.,ltd , https://www.nbbcscooter.com