Liquid chlorine under the pump Oxide powder for thermal spray refers to a type of powder material that is used in thermal spray processes. Thermal spray is a coating technique where a material in powder form is heated and propelled onto a substrate, forming a coating. Oxide Ceramics Powder,Pure Aluminum Oxide Powder,Chromium Oxide Ceramics Powder,Yttria Stabilized Zirconia Powder Luoyang Golden Egret Geotools Co., Ltd , https://www.hvafspray.com
1, the European model of water conservancy, high efficiency, the same outlet with two sets of hydraulic model, the best efficiency point flow of a wide range of work, NPSHR low (0.5 m)
2, multi-level segmented structure.
3, zero leakage, no seal, magnetic drive. Safe and economical and reliable
4, using the principle of building blocks, compact structure, versatility, easy maintenance.
5, in line with DIN24256 / API685 standards.
6, Isolation sleeve made of Hastelloy, special process molding, no weld in the axial direction, fully guarantee the sealing and chemical stability of isolation sleeve.
7, the use of double isolation sleeve structure, double protection, single-layer isolation sleeve leakage alarm can be achieved, this time the liquid chlorine is still completely sealed without leakage, safe and reliable.
8, special rare earth alloy magnetic materials, irreversible demagnetization temperature of 450 degrees. Fully guarantee the machine life of more than 15 years.
9, sliding bearing selection of high quality silicon carbide, purity greater than 99%, with high strength, elasticity, toughness and wear resistance, completely suitable for use in liquid chlorine.
10, axial force automatic water balance, sliding bearing thrust plate only in an open parking moment to withstand unbalanced axial force, fully guarantee the service life of the sliding bearing.
11, transmission parts rolling bearing SKF or NSK grease maintenance-free bearings.
12, equipped with running protectors, leak protectors and other safety measures.
Oxide powders are commonly used in thermal spray applications due to their high melting points, excellent wear resistance, and thermal insulation properties. They can be used to create protective coatings on various surfaces, such as metals, ceramics, and plastics.
Some common types of oxide powders used in thermal spray include:
1. Aluminum oxide (Al2O3): This oxide powder is widely used for its high hardness, wear resistance, and thermal insulation properties. It is commonly used for coating applications in industries such as aerospace, automotive, and electronics.
2. Zirconium oxide (ZrO2): Zirconium oxide powder is known for its high melting point and excellent thermal barrier properties. It is often used in thermal spray coatings for gas turbine engine components, where thermal insulation is critical.
3. Chromium oxide (Cr2O3): Chromium oxide powder is used for its high hardness, corrosion resistance, and wear resistance. It is commonly used in applications where high temperature and abrasive wear resistance are required.
4. Titanium oxide (TiO2): Titanium oxide powder is known for its high refractive index and excellent UV resistance. It is often used in thermal spray coatings for optical and decorative applications.
These oxide powders can be applied using various thermal spray techniques, such as flame spraying, plasma spraying, or high-velocity oxy-fuel (HVOF) spraying. The choice of oxide powder and thermal spray technique depends on the specific application requirements and desired coating properties.