Stainless Steel Pneumatic Angle Seat Valve with Actuator

Model NO.: /
HS Code: 84818010
Model NO.: /
HS Code: 84818010
Stainless Steel Pneumatic Angle Seat Valve with Actuator

Specification:
Product name: Stainless Steel Pneumatic Angle Seat Valve With Actuator
Signal input: Signal Intpt0/4...20mA to 0...5/10v(standard)
Feedback output: Position feedback output: /4...20mA
Optional: Device Net bus control (Options)
Supply: DC. 24V
Air pressure: 5.0-7.0 Bar
Air supply: G1/8"
Working pressure: 8 bar (standard) -10 bar
Working temperature: 120º C (standard) -180 º C

Description:
A new generation of high purity design of the angle seat valve
1. No dead angle, no retention to meet the requirements of all kinds of health. 
2. Advantages: The spool without bolt, without considering the risk of damaging other equipment because of bolt dropping; 
3. The valve have no dead angle, no need to consider the resulting corner because of the complex structure. 
4. Temperature: maximum temperature up to 200 (depending on the seal type) 
5. Seal: elastic shaft seal design, embedded spool design.

Features
1. Stainless steel actuator
2. Manual and pneumatic interchangeable 
3. Equipped with valve positioner:
0 / 5-20mA, 0-5 / 10V signal input (standard)
0 / 4-20mA, 0-5 / 10v signal output(option)
4. DEVICE NET bus communication(option), detailed information of locator to locator parameters.

We are a manufacturer specialized in producing all kinds of sanitary valves and fittings. Such as butterfly valves, check valves, ball valves, diaphragm valves, sample valves, stop reversing valves, relief valves, bends, tees, reducers, unions, ferrules, etc. Donjoy can supply this reducer with weld end, clamp end, and thread end connection. Requiring more detail information or catalog pls don't hesitate to contact us. For all our products, we can also produce according to ur drawing if ur Specification is out of our standard. Stainless Steel Pneumatic Angle Seat Valve with Actuator

Specification:
Product name: Stainless Steel Pneumatic Angle Seat Valve With Actuator
Signal input: Signal Intpt0/4...20mA to 0...5/10v(standard)
Feedback output: Position feedback output: /4...20mA
Optional: Device Net bus control (Options)
Supply: DC. 24V
Air pressure: 5.0-7.0 Bar
Air supply: G1/8"
Working pressure: 8 bar (standard) -10 bar
Working temperature: 120º C (standard) -180 º C

Description:
A new generation of high purity design of the angle seat valve
1. No dead angle, no retention to meet the requirements of all kinds of health. 
2. Advantages: The spool without bolt, without considering the risk of damaging other equipment because of bolt dropping; 
3. The valve have no dead angle, no need to consider the resulting corner because of the complex structure. 
4. Temperature: maximum temperature up to 200 (depending on the seal type) 
5. Seal: elastic shaft seal design, embedded spool design.

Features
1. Stainless steel actuator
2. Manual and pneumatic interchangeable 
3. Equipped with valve positioner:
0 / 5-20mA, 0-5 / 10V signal input (standard)
0 / 4-20mA, 0-5 / 10v signal output(option)
4. DEVICE NET bus communication(option), detailed information of locator to locator parameters.

We are a manufacturer specialized in producing all kinds of sanitary valves and fittings. Such as butterfly valves, check valves, ball valves, diaphragm valves, sample valves, stop reversing valves, relief valves, bends, tees, reducers, unions, ferrules, etc. Donjoy can supply this reducer with weld end, clamp end, and thread end connection. Requiring more detail information or catalog pls don't hesitate to contact us. For all our products, we can also produce according to ur drawing if ur Specification is out of our standard.