In order to welcome the “Green†Expo next year and comply with the key development direction of “Clean, Energy-saving, and Environmental Protection†of the city’s public transport system, Shanghai will implement exhaust emission IV regulations for some motor vehicles on November 1 this year, including diesel And gas engine-based bus, freight industry. It is reported that in the next few years, the National IV standard will be fully promoted across the country. In fact, as early as the beginning of this year, the National Development and Reform Commission, the Ministry of Science and Technology, and the Ministry of Industry and Information Technology put forward the “Ten Thousand Cities†plan, that is, to carry out the demonstration operation of 1,000 new energy vehicles in more than 10 large-scale cities in China for three consecutive years. For the public transportation, rental, official, municipal, postal and other fields, by 2010 the scale of China's energy-saving and new energy vehicles will reach 10,000 vehicles. These measures indicate that the commercial vehicle industry will enter a higher stage of environmental protection standards, which will put forward higher requirements for diesel and natural gas engine companies that provide commercial vehicles with supporting facilities. As a leader in the field of global powertrain, FPT Fiat Power Technology is following this trend and is taking root in China, bringing a variety of leading diesel engines and CNG engines to the Chinese market, providing a suitable market for the Chinese commercial vehicle industry in the critical period of development. Green solution for demand. In the field of diesel engines, FPT Fiat Power Technology has a strong product line and leading technology, a few years ago sensation in the industry's high pressure common rail technology is the FPT R & D results, this technology has completely changed the diesel engine, has now become the mainstream of the industry to use Technical route. At the same time, FPT developed the second-generation injection technology Multijet to further improve the engine's energy-saving and environmental protection capabilities. In China, FPT Fiat Power Technologies through the joint venture plant SFH SAIC Fiat Powertrain Co., Ltd. first introduced CURSOR9. This product integrates Europe's top system technology in one, in terms of power, economy, environmental protection, reliability, etc. Leading the way: The fuel supply system uses FPT's world-leading common-rail electronically controlled fuel injection technology; the intake system uses turbocharged intercooling technology, which significantly increases the air intake density and pressure, lowers the intake air temperature, and Three different turbocharging methods, VGT, WG, and Fixed, can be selected according to the operating conditions of the engine to make the combustion more fully. The exhaust gas treatment adopts the selective catalytic reduction exhaust gas treatment technology. The environmental protection performance is excellent, and the nitrogen oxide can be reduced by more than 80%. Emissions. With the advanced technical advantages and outstanding performance of CURSOR9, the SAIC Iveco Hongyan "Jieshi" heavy truck equipped with the CURSOR9 engine was officially authorized by the 2010 World Expo Bureau as the designated heavy truck for the Shanghai World Expo. The domestic heavy truck became the first designated product of the global expo event. Subsequently, SFH continued its efforts to launch a series of rich product lines, including star products such as NEF4, NEF6, F1C, covering displacement from 3.0L to 8.7L, maximum power from 70KW to 295KW, and maximum torque from 300Nm to 1600Nm. It can meet the extensive power demand of heavy, medium and light commercial vehicles and engineering fields. Among alternative fuel vehicles such as electric vehicles, alcohol automobiles, and natural gas, natural gas vehicles have been ranked among the most optimized solutions in terms of technology maturity, economic efficiency, availability, and resources. The technical experts of FPT Fiat Power Technology also believe that CNG CNG engine is undoubtedly one of the best choices in the medium and short-term alternative energy development trends in China. China has a vast territory and has abundant reserves of natural gas resources. At the same time, many regions have already introduced natural gas motor vehicles and related supporting facilities in the previous public transportation system planning in accordance with local conditions. These have laid a foundation for more economical, environmentally friendly, and large-scale promotion of the application of this technology in the future. A good foundation. FPT Fiat Power Technology has more than 70 years of experience in producing CNG engines and is able to supply the market with a variety of CNG engines ranging in size from 3 to 8 litres. In the past 10 years, tens of thousands of products have been sold in various markets around the world. In the same market, FPT's CNG engine has lower cost, better performance, and cleaner emissions than other brands. Its CO2 emissions per kilometer is only 114 grams, and its emission level is far better than that of strict Europe. V standard; In the same class engine, its use cost can be reduced by 50% compared with the gasoline engine, reduce 30% than the diesel engine. Compared with other lean burn engines using FPT's fully-combustion system, FPT's natural gas engine lean burn significantly reduces engine exhaust temperatures, reduces nitrogen oxide emissions, and improves hydrocarbon oxidation efficiency. , At the same time, significant savings in maintenance costs (such as spark plugs, etc.) Such excellent performance advantages make it widely used in the world. During the period 2003-2008, FPT Fiat Power Technologies provided 1,450 CNG engines to Beijing Bus Company, 800 of which were used to transport special vehicles for athletes, coaches, reporters and officials of overseas delegations during the Olympic Games. On the 60th National Day Ceremony just held in New China, passenger cars equipped with FPT Fiat Power Technology engines were involved in the personnel transfer tasks of the cast members in Beijing. This series of measures has enabled FPT Fiat Power Technology's "Clean, Strong, Safe" CNG engine to be deeply rooted in people's hearts and become an international city's high quality business card in terms of environmental protection and efficiency. Mr. Shen Hui, President of FPT Fiat Power Technologies China, said: "At present, China's commercial vehicle market is facing tremendous opportunities and certain challenges. The government has stepped up the construction of social infrastructure to provide a market for commercial vehicles, and the government has also adopted commercial applications. The requirements for energy saving and environmental protection of vehicles, especially those for bus systems for public transportation systems, pose even greater opportunities for vehicle companies and key component companies.FPT Fiat Power Technology takes root in China and is committed to bringing our global leading technologies. Successful application experience of successful projects was introduced to the Chinese market to enhance the core competitiveness of the commercial vehicle powertrain industry and to achieve a win-win development with China's commercial vehicle industry."
We have a complete plastic consumables production line. Mold-making, injection molding and sterilization, all the procedures are done efficiently in our own factory. Precision molds, high quality raw material and advanced equipment to produce and perform quality testing with strict and comprehensive rules to ensure our products meet the highest quality and performance standards expected by the hospitals, research institutions and industrial, clinical laboratories that we supply.
• Excellent mold-making ability.
Our R&D team, with over 30 years` experiences, work with high quality mold-making equipment imported from Germany and professional mold analysis software that allow NEST to develop more precise molds.
• Injection molding in Class 10,000 and Class 100,000 clean rooms, with strict quality control.
10,764 ft2 Class 10,000 clean room and 32292 ft2 Class 100,000 clean room, all-electric high-speed injection molding machines imported from Japan, raw material which meet USP Class VI requirements. Production and quality control are performed strictly in accordance with corresponding SOP.
• Sterilization by electronic beam irradiation.
The Rhodotron TT200 electron accelerator which imported from the IBA company, Belgium. A world leader in the E-Beam sterilization industry. Sterilization process has been certified by the ISO 11137 quality system. Compared with sterilization by cobalt 60 or ethylene oxide sterilization, sterilization by electronic beam irradiation is more efficient and safer. It requires less time and will not produce any chemical residue.
The length and width of the deep well plate comply with the SBS international standards. The depth of wells is increased based on the appearance and size of normal plates (mainly 96-well and 384-well plates) to enlarge the volume of each well. In addition, the manufacturing material
(currently mostly used is polypropylene (PP)) is changed and the surface treatment process has been improved for this series of deep well plates to adapt to its specific use range. The deep well plates of NEST have a variety of specifications, conforming with the needs of fully automatic workstations and experiments.
When using a thermal cycler with fluorescence detector above the samples, NEST white PCR plates effectively prevent crosstalk between wells. The Nest white PCR plate also allows for high accuracy of detection when signal intensity is low. Nest clear PCR plates are designed for PCR machines where the fluorescence detector is located below the sample plate.
biochemistry and Molecular Biology,biotechnology and Molecular Biology,Inoculating Loops And Needles,ELISA Plates,8-tube PCR Strips and PCR Plates Wuxi NEST Biotechnology Co.,Ltd , https://www.nest-biotech.com
