Centralized lubrication system for wind turbines

We all know that any relative parts need to be lubricated, because the relative movement between parts is bound to produce friction and wear, and lubrication is the most direct and effective way to reduce friction, reduce or delay friction. In fact, during the use of mechanical equipment, due to various reasons, it may produce large and small faults. Among them, lubrication is one of the most serious failures in machinery and equipment at the time of failure. Relevant statistics show that over 50% of bearing failures are caused by lubrication. It can be seen that lubrication technology ensures normal and stable operation of the equipment, prolongs equipment life, reduces energy consumption, ensures on-site safety, and reduces Production costs, extend the periodic maintenance cycle, and ensure that the product quality has an inestimable role.

In the same wind found, the stability of the generating unit has a direct impact on the economic benefits of the wind project. Reasonable lubrication can not only reduce the loss of important components, ensure the stable operation of the wind turbine, but also reduce the overall operating costs. Due to the large number of bearing lubrication points of wind turbine generators, such as pitch bearings, yaw bearings, spindle bearings, and generator bearings, if lubrication is performed by manual single-point lubrication, some lubrication points are difficult to lubricate due to space reasons. It is labor-intensive, takes a long time, and can't be used to oil the bearings regularly and quantitatively, eventually leading to bearing failure. By analyzing the actual use of the centralized lubrication system, the automatic lubrication system can use the motor to control the intermittent oil supply to the bearings and evenly lubricate the system. The automatic lubrication system can automatically provide periodic oil supply to each team's bearing points. It is a very reasonable and feasible lubrication method to maintain the proper oil film for the pair of movements and effectively prevent bearing failure.

Sanwa Poda Potentlube Centralized Lubrication Pump, also known as multi-point centralized lubrication system, is a progressive lubrication system that is suitable for use in some large-scale mechanical equipment. It distributes oil through the high-speed operation of the main engine. Layers of grease are transported in increments of up to 300 lubricated points each, with a medium pressure of 350 kg.

Supply voltage: DC24V

Capacity: 2L/8L

Lubrication time: according to site conditions