Since the vortex flowmeter is a new type of flowmeter developed by the Karman vortex principle , it must meet certain principle conditions during installation, and the instrument can function normally. In practice, we encounter many users in the later stage. The main cause of problems in the process is the installation of incorrect locks. Below we introduce some problems that must be paid attention to during the installation of steam vortex flowmeter . 1. Preparation before installation of the instrument: The preparation work before the installation of the vortex flowmeter is particularly important. You must carefully read the instructions of the flowmeter to understand the structure , installation environment, installation requirements and installation in strict accordance with the instructions. The instrument that is put into operation after installation is also Pay attention to safety measures, especially high temperature and high pressure media. 2. Request for advice: 1) Determine whether the vibration of the pipeline is too large during installation, and avoid installing it on the pipeline with large vibration, so that it is not necessary to triangulate the pipeline; 2) In the installation environment, when the flowmeter is subjected to strong heat radiation from other equipments outside, the instrument is insulated or ventilated; 3), sufficient space should be reserved around the vortex flowmeter for later meter reading and maintenance; 4), vortex flowmeter can be installed vertically, horizontally, tilted, etc., but if the medium is liquid, it must be full, when it is installed vertically, the liquid needs to flow from bottom to top; 5), we recommend that the vortex flowmeter be installed as far as possible downstream of the valve; 6) Ensure that the steam vortex flowmeter must have a certain straight pipe length before and after; 3. Some precautions when installing the vortex flowmeter: 1), must pay attention to the installation, do not install the vortex flowmeter reverse, our factory's vortex flowmeter has a clear arrow mark, remember! The direction indicated by the arrow must be consistent with the direction of fluid flow, otherwise the flow meter will not work; 2) Our engineers generally recommend that the instrument be installed vertically on the horizontal pipe, but since some users have limited installation sites, they can also be installed horizontally, but try to install vertically upwards; 3), there must be a certain straight pipe distance before and after the instrument. The reason for this is because of the Karman vortex principle of the working principle of the vortex flowmeter, the fluid must have a certain distance to generate the vortex, and the distance cannot meet the requirements. The instrument data will have certain errors. The specific requirements can be seen in the following figure: If the distance between the front and the back cannot be guaranteed, the minimum and minimum distances must be 10 times in the upstream and 5 times in the downstream. Otherwise, the meter will not work normally. Sms Spunmelt Nonwoven Production Line The sms non-woven fabric production line is used to produce polypropylene fiber spun webs and hot-rolled reinforced non-woven fabrics. Using polypropylene as the main raw material, supplemented by color masterbatches and additives such as anti-oxidation, anti-pilling, and flame retardant, we can produce polypropylene spunbonded hot-rolled non-woven fabrics with different colors, different properties, and suitable for various purposes. It has different uses and is widely used in medical treatment, sanitation, agriculture, construction, geotechnical industry, making non-woven protective clothing, etc.
Various special treatments are carried out on non-woven fabrics to meet the requirements of customers for various special properties of non-woven fabrics. The treated non-woven fabric has anti-alcohol, anti-blood, and oil-resistant functions, and is mainly used in medical surgical gowns and surgical drapes. Antistatic treatment: Antistatic non-woven fabrics are mainly used as materials for protective equipment that have special environmental requirements for static electricity. Absorbent treatment: Absorbent non-woven fabrics are mainly used in the production of medical consumables, such as surgical drapes, surgical pads, etc. Flame-retardant treatment: Flame-retardant non-woven fabrics are widely used in furniture products and aviation products. Antibacterial deodorization and photocatalyst effect treatment: This kind of non-woven fabric is mainly used in the field of household products. Anti-ultraviolet treatment: Anti-ultraviolet, anti-aging non-woven fabrics are mainly used in agricultural covering fabrics, car covers and other fabrics where sun protection and anti-aging effects are required. Fragrance treatment: Fragrance non-woven fabrics are used in sanitary products (mint, lemon, lavender, etc.).
Sms Spunmelt Nonwoven Production Line,Sms Non-Woven Fabric Making Machine,Sms Spunmelt Composite Non-Woven Fabric Machine,Sms Pp Spunbond Meltblown Making Machine,SMS spunmelt composite non-woven production equipment,SMS non-woven equipment Changzhou Puyisen Machinery Technology Co., Ltd. , https://www.czsmmsmachine.com
The composite production line can be replaced with different configurations to produce S, SS, SSS and other series of products to meet the needs of customers in the polypropylene spunbond non-woven market for different purposes.