Naipu ZG series pumps are cantilevered,horizontal,centrifugal slurry pumps. They are used international advanced solid-liquid two-phase flow theory and were designed using the Minimum-Wear Principle. The flow parts of this pumps are suitable for the flow of state media for it's set shape, which reduces hydraulic loss of eddy and impact, both in pump and along the pipeline; so reduced friction of flow parts, lower noise and vibration of the pump translates into improved hydraulic efficiency.
Sugar Beet
NP-ZG Slurry Pump Construction Component
Main Part Number At The Drawing
Materials of Construction
VOLUTE
IMPELLERS
BASE
EXPELLER
EXPELLER RING
SHAFT SLEEVE
SEALS
Standard
High Chrome Alloy
High Chrome Alloy
Cast Iron
Chrome Alloy
Chrome Alloy
SG Iron
Natural Rubber
Options
SG Iron
SG Iron
Mild Steel
SG Iron
SG Iron
EN56C
Nordel
Note:Approximate performance for clear water,to be used for primary selection only.
ZG SLURRY PUMP PERFORMANCE PARAMETERS
ZG High Efficiency Slurry Pump ZG High Efficiency Slurry Pump, High Efficiency Slurry Pump, Ah Slurry Pump, High Head Slurry Pump Shijiazhuang Naipu Pump Co., Ltd. , https://www.naipu-pump.com
Typical Applications---
Electric Power
Constructional Material
Mine Coal
Coal washing
Sand Reclamation
2 Shaft
3 Bearing Housing
4 Disassembly Ring
5 Expeller
6 Rear Liner Plate
7 Volute Casing
8 Impeller
10 Front Casing
11 Rear Casing
12 Stuffing Box
13 Water Seal
14 Base
15 Support
or
SG Iron
or
SG Iron
Fabricated
Ferralium
Hasteloy C
Ceramic
Stellite
Chrome Oxide
Neoprene
Viton
Butyl
EPDM
ZG SLURRY PUMP SELECTION CHART
Non-directional self-ballasted LED lights standard list for general lighting: Foshan Lighting tops
Recently, China National Institute of Standardization, China National Standardization Association and other institutions jointly launched the establishment of the enterprise standard service alliance, and released the first batch of China's corporate standards list, which covers the standard list of non-directional self-ballasted LED lights for general lighting, the list Based on the joint evaluation report of the National Electric Light Source Quality Supervision and Inspection Center (Beijing) and the standard full-view (Beijing) Information Technology Co., Ltd. Evaluation index: Energy efficiency value Energy efficiency grade color rendering index This ranking is sorted by the energy saving evaluation value as the main parameter, and the color rendering index is used as the auxiliary reference value. Energy efficiency value: Light produced by each kilowatt of electrical energy consumed. Energy efficiency rating: It is a grading method that indicates the difference in energy efficiency of lighting products. According to the relevant regulations of national standards, the energy efficiency labeling of lighting products in China is divided into three levels. The higher the level, the better the energy saving effect. Color rendering index: The color rendering index is a parameter that displays the true color of an object. Evaluation method This enterprise standard evaluation adopts the method of index comparison. Under the premise of ensuring that the company declares that its corporate standards are in compliance with national laws and regulations, mandatory standards and relevant industrial policies, the semi-dispensing light/power is more than 5W/the initial color temperature is below 4000K, and the enterprise standard is compared with the national standard. The comparison between the enterprise standards compares the applicable value of the energy-saving evaluation value of the non-directional self-ballasted LED lamps for general lighting. Evaluation Process Standard Acquisition: 14 enterprise standards declared by 14 companies in the enterprise standard information public service platform. Analysis ranking: Analysis of 14 enterprise standard data. According to the principle of semi-light distribution/power 5W/initial color temperature below 4000K, based on GB/T31112-2014 specification requirements and GB/T24908-2014 color rendering index chromaticity characteristics requirements, the standard standard of initial light efficiency of enterprise standard should be called Compared with the energy-saving evaluation value in GB 30255-2013 Non-directional self-ballasted LED lamp energy efficiency limit value and energy efficiency rating, the energy-saving evaluation value is ranked. Evaluation Results The 14 companies have declared 14 corporate standards. In the corporate standards declared by Xiamen Tongshida Lighting Co., Ltd. and other four companies, the initial light efficacy of the self-ballasted LED lamps for general lighting is not less than the energy-saving evaluation value of GB 30255-2013. Among them, Foshan Electrical and Lighting Co., Ltd. The initial luminous efficacy of the corresponding specifications exceeds 40% of the national standard GB 30255-2013 energy-saving evaluation value; 9 enterprise standards such as Panasonic Electric Machine (Beijing) Co., Ltd. meet the energy efficiency limit of GB 30255-2013 under the premise of ensuring chromatic products. Value; the data of another enterprise standard does not match the requirements of this evaluation data, but it has characteristics in product standards.
1 Coupling
9 Front Liner Plate