During the event, Deputy General Manager Pang Wei led the service providers to visit the company's automated production line and bridge assembly assembly line, enabling service providers to have a deeper understanding of product assembly and product quality control. At the symposium, the service providers spoke freely, focusing on the quality performance of Hande's axle in the after-sales market, the problems and confusions in the after-sales service process, the actual operating conditions of the market and the customer's usage habits, and providing quality improvement for the products. Suggest. Relevant personnel of the company analyze and reply to the problems mentioned by the service providers, and further develop detailed solutions. Through communication, the needs of the after-sales service market and end customers were further clarified, which laid a good foundation for the continuous improvement of product quality. General Manager Wang Zhanchao requested that quality and after-sales units should strengthen communication with service stations, get feedback on problems and respond quickly; further strengthen market research visits, go to the market and get accurate customer demand for products. The quality provides the basis for improvement; the revision criteria for the failed parts are continuously revised and improved, and the work of the service station is better supported. Finally, Mr. Wang put forward three suggestions for the development of the service station. First, we must take customer satisfaction as our tenet, improve customer care and increase customer stickiness. Second, we must strengthen maintenance skills training, control and control the source of accessories, and build a stable and professional The service team; three must establish their own service brand, win customers and win the market. Air Source Heat Pump
Water circuit electric heater
Air Source Heat Pump Air Source Heat Pump,Hot Water Air Source Heat Pump,Heating Air Source Heat Pump,Scroll Air Source Heat Pump Jinan Amrta Air Conditioning Co.,Ltd , https://www.amrtaac.com
Hande Axle Product Market Performance Exchange Symposium
Cooling capacity: 20kW-50kW
Characteristics:
1.Structure. Panels and base frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
2.Compressor. Hermetic scroll type compressor, equipped with the crankcase heater and thermal protection with thermal overload cut-out and crankcase heater mounted on rubber vibration isolators.
3.Axial fan. External rotor type axial fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, provided with a protective outlet grille.
4.Evaporator. High efficiency and low pressure drop stainless steel (AISI 316) water exchangers, with anti-freeze heating element (option) and differential pressure switch, factory insulated with flexible close cell material.
5.Condenser. Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins, 100% fully quality tested; sub cooling circuit to prevent freezing at the base (optional); protected with metal grill.
6.Desuperheater: High efficiency stainless steel brazed plate heat exchanger, factory insulated with flexible close cell material (optional).
7.Refrigerant circuit. Copper tube connection with charge valve, filter, sight glass, gas-liquid separator, thermostatic expansion valve, low pressure switch with automatic reset, high pressure switch with manual reset. The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.
8.Water circuit. Built with air vent valve, water drain connection, and female-threaded hydraulic connectors. Water pump (8kW-30kW), differential pressure switch. Expansion tank (8kW-30kW)
9.Electric panel. Consists of:
Compressor contactor
Compressor protection breaker
Fan motor protection breaker
Control circuit protection breaker
Phase sequence relay (only for 3-phase)
Programmable microprocessor controller
10.Optional
Additional electric heater embedded in the coils for defrosting in low temperature ambient. It must be factory installed
Stainless steel covering
Remote condenser
Tube in tube heat exchanger
Responding to customer needs, Hande Axle specially invited Shaanxi Heavy Industry Service Station to carry out vehicle and bridge product exchange
On May 22, 2019, Hande Axle invited the 11 benchmark service stations of Shaanxi Heavy Duty Truck to the company to conduct a seminar on the performance of the axle products market. Company party secretary, general manager Wang Zhanchao, deputy general manager Wang Yifeng, deputy general manager, chief quality engineer Pang Wei, research institute, innovation center, quality management department, after-sales service department and relevant leaders of Shaanxi Heavy Industry Service Department attended the meeting.