1. Compression garbage trucks used in China will have a large degree of presence when they are carrying out operations. The phenomenon of disturbing people and so on occurs when the noise is relatively large. When the vehicle is designed and manufactured, it should be careful to choose the power take-off device, the engine and the chassis of the vehicle. Use measures to increase the smoothness of the system movement, to reduce the working noise better, and to use materials capable of absorbing noise to carry out the structure. In terms of design, it should be able to reduce the vibration. Through the further optimization of the loading mechanism and the hydraulic system, the quality of the assembly and the precision of the machining are greatly improved, so that the purpose of reducing the noise reduction of the compact garbage truck when working can be achieved. 2. There is no such high level of consciousness in the domestic waste garbage classification as in foreign countries. Usually, domestic garbage is mixed with solids and liquids. There is no garbage leakage in order to achieve better transportation garbage. , Drip, can refer to the following method to solve. 1. Install an edge baffle between the loader and the stuffer flip bucket, which can prevent the leakage of garbage. 2. The floor of the carriage should have a certain slope to prevent leakage of landfill leachate. 3. Install a sump tank in the underside of the obturator, which will be used for dripping of sewage between the obturator and the storage compartment. 4. Better sealing of the joints between the filler and the car body to prevent leachate and rubbish from leaking and dripping during the compression process. 5. The self-quality of the compressed garbage truck can be reduced, and the load utilization rate of the vehicle can be increased, and the operating cost of the vehicle can be reduced. Because the structure of the compression type garbage truck is more complicated, its own quality is also relatively large. Therefore, when the vehicle is designed, the chassis should be prioritized to choose the higher technical content, lighter self-quality, and good dynamic performance. , And cost-effective domestic chassis. The use of high-strength materials can reduce the self-quality of the vehicle. For accessories such as cover plates, trims, fenders, and the like, injection molded parts with relatively low density can be used, parts with higher integration degree can be used, and the space occupied area and the space can be better reduced. Quality, and will also help improve the working performance of the hydraulic system. (Text / Sun Ni) Our armed 6-axis grinding sanding polishing abrasive Industrial Robot usually works together with our Force Control System. It has all the characters of force control system, or active contact flange, Constant Force Actuator---flexible control, quick reponse, instant adjusting. widely used in 3c electronic products, household and sanitary ware, traffic and transportation, auto parts accessories, aerospace workpiece and millling workpiece precision fields. Daru Technology (Suzhou) Co.,Ltd which is specialized in grinding and polishing has positioned its self as flexible and intelligent grinding system expert. For many years researching and developing, Daru has promoted flexible and intelligent grinding system, which can realize flexible control for force, initially adapt workpiece surface size changing in its running process; More importantly, instantly control force magnitude in a demanding range, can ensure workpiece surface effect even and consistent, improve yield and make it possible to realize factory automatic mass production. Armed industrial robot, grinding industrial robot, sanding industrial robot, polishing industrial robot, abrasive industrial robot. DARU Technology (Suzhou) Co., Ltd. , https://www.darudfc.com
 