1, inflate should pay attention to safety. Always check the air pressure with a barometer to avoid over-inflating and bursting the tires. 2. After the vehicle stops running, it must wait for the tire to cool before re-inflating. Because the temperature of the tire will increase when the vehicle is running, it will have an impact on the air pressure. 3, check the valve. If the valve stem and the valve core do not match with each other, there are protruding recesses and other defects, and it is inconvenient to inflate and measure the air pressure. 4, inflate should pay attention to clean. The filled air must not contain moisture and oil to prevent deterioration of the inner tube rubber. 5, when the inflation should not exceed the standard air pressure after the deflation, can not be too long after the out inflated and over inflated, if more than the standard will lead to excessive expansion of the cord, causing its strength to reduce impact The life of the tire. 6, before filling the valve should wipe the dust on the mouth, do not loosen the valve core, after the completion of the application of soap bubble water (or saliva) painted on the valve, check for leaks (if the leak will produce small bubbles) , And valve caps are tightly fitted to prevent sediment from entering the interior of the valve. 7. When the radial tire is inflated, due to structural reasons, the amount of sinking and grounding is large, and it is often mistaken for insufficient inflation and overinflation; or vice versa, because the amount of sinking and grounding area is larger. In case of lack of air pressure, I mistakenly think that it is sufficient. Apply a standard barometer to measure. The radial pressure of the radial tires should be 0.5-1.5kg/cm2 higher than that of ordinary tires. 8. The barometer used in the car or the barometer used between the tires should be calibrated regularly to ensure accurate pressure check.
We have got CE certificate from 2015. We make can manufacture various types of high mast with lifting system for stadium highway parking lot and etc.
Our firm introduced whole set of good-sized numerical control hydraulic
folding equipment(1280/16000) as well as equipped with a series of
good-sized professional equipments of armor plate-flatted machine,
lengthways cut machine, numerical control cut machine, auto-closed up
machine, auto-arc-weld machine, hydraulic redressing straight machine,
etc. The firm produces all sorts of conical, pyramidal, cylindrical
steel poles with production range of dia 50mm-2250mm, thickness
1mm-25mm, once taking shape 16000mm long, and large-scale steel
components. The firm also is equipped with a multicolor-spayed
pipelining. At the meantime, for better service to the clients, our firm
founded a branch com. The Yixing Jinlei Lighting Installation Com,
which offers clients a succession of service from design to manufacture
and fixing.
Steel Lighting Pole High Mast,30m High Mast Pole, High Mast pole for stadium Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.steel-pole.com