In order to clarify the responsibility of accidents, improve the transparency of accident handling, standardize the procedures for handling accidents, and formulate this system according to the requirements of company safety and equipment management system. 2. area The system is applicable to the beneficiation plant workshop equipment accident investigation, analysis, program management process. 3. System content 3.1, classification of accidents 3.1.1. After the equipment is damaged, if there is no downtime and the economic loss is below 500 yuan, it is a four-level accident. 3.1.2. After the equipment is damaged, it will cause a shutdown and affect the production of the grinding and floating workshop, and the impact time is more than 2 hours and less than 4 hours, which is a third-level accident. 3.1.3. After the equipment is damaged, causing the shutdown to be less than 4 hours and less than 8 hours, it is a secondary equipment accident. 3.1.4. After the equipment is damaged, it will cause a shutdown of the equipment for more than 8 hours and 12 hours. 3.2. Accident investigation procedure 3.2.1. The fourth-level accident is investigated by the workshop, and the investigation report is submitted according to the actual situation of the investigation. At the same time, the handling opinions are reported to the factory department according to the responsibility. 3.2.2. The third-level accident is investigated by the equipment room and the safety office, and finally the report and processing opinions are reported to the factory department for filing. 3.2.3. The second-level equipment accident is assigned by the factory to a special person to form an investigation, and the investigation report and handling opinions are written, and reported to the company's mobile department for filing and verification. 3.2.4. The first-level equipment accident is jointly investigated by the factory and the Mobility Department. At the same time, the Mobilization Department is responsible for forming a written report and reporting to the company. 3.3. Punishment standards for accidents 3.3.1 After the accident occurs, when the economic responsibility of the relevant personnel is investigated, the equipment accident level is not considered, but the direct economic loss should be considered. The main components are maintenance costs and production stoppage losses, of which 90% of the maintenance costs are lost. It is 10%. 3.3.2, specific punishment standards 3.3.2.1. When the loss is less than 500 yuan, the economic responsibility of the post worker shall be investigated 20%, and the management personnel shall be exempted from liability; 3.3.2.2, when the loss is less than 500 yuan and less than 2,000 yuan, 15% of the economic responsibility of the post worker shall be investigated, and the management responsibility of the squad leader shall be investigated 10%; 3.3.2.3, when the loss is less than 2,000 yuan and 8,000 yuan, the economic responsibility of 5% of the post work shall be investigated, the management responsibility of the squad leader shall be investigated 6%, and the workshop director shall be responsible for 7% of the supervision. 3.3.2.4. If the loss is less than 8,000 yuan and less than 150 million yuan, the economic responsibility of 4% of the post work shall be investigated, the management responsibility of the squad leader shall be 5%, and the supervision of the workshop director shall be 6%. 3.3.2.5, resulting in the loss of more than 15,000 yuan, according to 50% of the company fined Factory meter penalty amount, in accordance with the specific ratio separate study responsible for the accident. 3.4. Handling requirements for accidents 3.4.1. Accident handling must adhere to the “four non-lost principlesâ€, namely: 3.4.1.1 The cause of the accident has not been clearly identified; 3.4.1.2, the person responsible for the accident and other employees are not educated; 3.4.1.3. Measures not to prevent recurrence of accidents are not allowed; 3.4.1.4 The person responsible for the accident has not been dealt with. 3.4.2 After the accident is processed, all the files must be archived, and the accident will be taught to let other employees understand the danger of the accident. Threaded Roll Machine For Steel Rod
The Thread Rolling Machine is a multifunctional cold extrusion forming machine tool. It can perform thread, straight, and twill rolling treatments on the workpiece in the cold state within its rolling pressure range; straight tooth, helical tooth and helical spline gears Rolling; straightening, reduction, rolling and various forming rolling. Mainly used for rolling various precision external threads and high-strength standard parts, including ordinary threads, trapezoidal threads and modular threads.
Thread Rolling Machine Price, High Speed Thread Rolling Machine, Flat Die Thread Rolling Machine, Z28-200 Type Thread Rolling Machine Borong Machinery Manufacturing CO. LTD , https://www.boronjx.com
Concentrator plant equipment accident handling method
　　    1. Purpose