Carburetor cleaning agent 2. Cross knife 3. Word knife 4. Plum eight or plum ten 5.T seven (T-sleeve seven) or plum seven Turn off the oil and unplug the tubing. Use the plum eight or plum ten (depending on the size of the nut) to twist the nut that connects the carburetor to the engine, then twist the screw connected to the carburetor and the filter, and finally remove the throttle line. Use a cross knife to twist the three screws of the carburetor float chamber cover After decomposing the carburetor, let's take a look at the names of its parts. Remove the main injector hole of the carburetor, the idle oil injection hole and the float Use a carburetor cleaner to align the various orifices (note that the eyes should not be aligned with the carburetor to prevent the cleaning agent from being sprayed into the eyes) After cleaning, the carburetor can be installed. Then you can put him in the car. Filling Machine,Liquid Filling Machine,Bottle Filling Machine,Water Filling Machine,Pharmaceutical Filling Machine Jining Myway Machinery Co., Ltd. , https://www.mwpackall.com
Tools / raw materials
Method / step
1 Remove the carburetor from the motorcycle first. 
2 Remove the carburetor float chamber 
3 Understanding Carburetor 
4 Decomposition of carburetor parts 
5 Start cleaning the carburetor 
6 loaded carburetor 
(Source: Network Invasion)
How to clean the motorcycle carburetor?
Motorcycle carburetor deposits many impurities or moisture after prolonged use. This makes the motorcycle difficult to start or unable to start, even if it can be started, it does not drive smoothly. Therefore, the carburetor should be cleaned every 5,000 kilometers .