Japan's imports of fasteners in the first half of 2011

In the first half of 2011, the import of fasteners in Japan showed a slight increase. The import volume was 115,000 tons, a year-on-year increase of 13.38%, and the import volume was 34.70 billion yen, an increase of 13.0% over the same period of last year.

Among them, the import volume of other steel materials and bolts was the largest, at 46,617 tons, an increase of 15.93% year-on-year, and the import amount was 8.83 billion yen, an increase of 8.49% year-on-year. The largest increases in import volume were other fasteners, lamp hooks, tapping screws and other screws, which increased by 58.10%, 54.53%, 51.91% and 49.98%, respectively; the largest increase in imports was self-tapping screws, which was a year-on-year increase of 55.16%. .

The number of species (KG) Amount (yen) in the first half 2010 first half 2011 first half 2011 first half-year 2010 year lag screws 431,600 540,275 67,224,000 91,211,000 35.68% 25.18% Other wood screws 6,479,017 7,913,922 22.15% 1,331,615,000 1,663,016,000 24.89% 297,958 460,445 light hook 54.53% 20.70% 163,415,000 197,247,000 3,988,815 6,059,373 tapping screw 1,502,826,000 968,577,000 51.91% 55.16% 0.47% stainless steel bolts 5,645,813 2,176,648,000 5,672,387 2,546,808,000 17.01% other steel materials bolt 40,211,384 46,617,478 8,141,564,000 8,833,097,000 15.93% 8.49% screws 14,252,635 13,539,437 4,872,182,000 4,782,623,000 -5.00% -1.84% stainless steel nuts 2,743,766 2,869,902 4.60% 1,852,891,000 2,245,350,000 21.18% other steel materials nut 12,738,124 13,562,864 6.47% 4,736,178,000 5,645,076,000 19.19% other screws 2,943,765 4,415,067 49.98% 1,216,506,000 1,525,240,000 25.38% spring washer, wave washer 2,687,198 2,721,896 1.29% 623,731,000 666,947,000 6.93% other washer 6,022,197 6,692,571 11.13% 2,283,060,000 2,488,917,000 9.02% riveting Nail 379,259,000 414,803,000 708,716 754,207 6.42% 9.37% 3.02% pins 949,804 978,442 297,519,000 384,729,000 1,563,497 2,471,898 29.31% 58.10% Other 7.21% Total 101,664,289 1,599,010,000 1,714,265,000 115,270,164 30,709,379,000 34,702,155,000 13.38% 13.00%

Application Function: measurement for oxygen, crystallization for measuring carbon content, measuring low carbon content under the carbon oxygen balance principle,calculation and measurement of acid soluble aluminum

Molten Iron Sampler is made of fiber which is high quality and high temperature resistance. It is dedicated to collect metal liquid from furnace or ladle for chemical analysis. The sampler could be resistant to extreme cold and hot and there will be no cracks, which means that it can be used repeatedly

CE-CUP round carbon for foundryCE-CUP square 3

Foundry Thermal Analysis

Foundry Thermal Analysis,Thermal Analysis Cup,Round Carbon Cup,Carbon Cup

Cangzhou Qirun Detecting Instrument Co., Ltd. , http://www.qrdetecting.com