In every big machine room, we can see relatively large cabinets everywhere. Actually, it is not the function of cabinets. Many cabinets will be equipped with USP power supply to assist the protection and protection of the system, and it can solve the problem of high Density cooling, managing a large number of cables, high-capacity power distribution and full compatibility with different manufacturers of rack-mounted equipment, cabinet functions become more powerful. Let's talk about how to organize the cabinet below. There are two steps here: First: First of all, to inform the user without affecting the normal work of the user to organize the cabinet. Then according to the network topology, the existing equipment conditions, the number of users, user grouping and other factors outlined cabinets cabling and equipment inside the line map. Then prepare the required materials: jumpers, labels, various types of plastic ties. A: Hands-on installation of the cabinet: First, use the screws and nuts of the random box to tighten the holder; Second, the cabinet down, the wheels can be placed on the activities; Third, according to the location of the device on the holder Adjust and add baffle. B: Organize the cables on the cabinet: divide the network cables into groups, and the number of groups is usually less than or equal to the number of the cable management racks behind the cabinet. Bind the power cables of all the devices together, plug them into the through-hole of the rear panel, and look for their own equipment through a single cable management arm. C: Hands-free equipment in the framework: the baffle in the cabinet to adjust to the appropriate location, so that administrators can not open the door to see the operation of all equipment, according to the number and size of the appropriate equipment to add Baffle. Be careful to leave some clearance between the baffles. Put all the switching equipment and routing equipment used in the cabinet in accordance with the pre-drawn figure. D: Labeling the cable for easy identification: After all the network cables are connected, you need to identify each network cable, wrap the ready-made adhesive tape onto the network cable and mark it with a pen (usually indicate the room number or For what purpose), requires the logo to be easy to understand. The crossover cable can be distinguished by using different color sticky notes and general network cable. If there are too many devices, classify the device and label the device. Second: When everything is ready, check it out. Then turn on the power, network connectivity testing to ensure the normal work of users - this is the most important. Finally, finishing, you need to organize the contents of the cabinet for document updates. Redraw equipment layout and network cable connection diagram. In the figure to indicate the number of equipment and network cable logo for inspection access. Our organic beeswax tealight candles may be small in size, but like all our Beeswax Candles, they still give off a bright cheery light and delicate honey scent. Each 100 percent beeswax tealight candle is hand crafted using a lead-free 100% cotton wick and lightly filtered 100% pure beeswax. Our clean-burning, non-toxic beeswax tea lights are a beautiful way to bring warmth into any space. Regardless of how you use them, you can be certain that our beeswax tea lights will burn clean and bright for up to 5 hours. Organic Beeswax Tea Lights, 100 Percent Beeswax Tealight Candles, Natural Beeswax Tealights Shijiazhuang Tabo Candles Sales Co., Ltd. , https://www.tabocandles.com
Our beeswax tealights are available in clear cups, aluminum cups, or refills (no cup). The refills will fit in the clear cups which can be reused again and again.