GPS25 Engineering Drilling Machine

Model NO.: GPS25
GPS GPS-series engineering drill rig
GPS-series engineering drill rig is applied to large diameter cast-in-place piling with reinforced-concrete for high building, harbor, dam, bridge, basic engineering and also can drill large diameter hole of water well and engineering.
Features
  1. This kind of rig is equipped a hydraulic device that can make can rotary and supporting plate to move away from the borehole.
  2. The mast is installed a guide way to the benefit of vertically of borehole and have a retraction system to move the kelly away from the center of rotary.
  3. It us equipped with a centrifugal mud pump system for pumping reverse circulation drilling to handle various conditions and formations and can be changed into direct circulation immediately to suit different needs
  4. To life or lower mast is operated by hydraulic control quickly and reliably
  5. Main and vice winches employ the mechanism of planetary-gear train, so the operation is simple and convenient.
 
Specifications Unit GPS-25
Drilling depth m 80
Diameter of hole m 2.5
Torque KN.M 65
Speed forward r/min 8,10,12.5,16,22,29,37,49,58,77
reverse 10,13
Main winch capacity (single rope) KN 30
Vice winch capacity (single rope) KN 30
Mud pump m3/h 180
Effective height m 10
Drill pipe mm 210x210x3750
Power kw 55
Weight T 13
Dimensions(LxWxH) m 6.1x2.6x12

Unground

Taizhou Tianma Plastic Products Co. LTD , https://www.tmepp.com