Large Package Twisting Machine is mainly used for the one-step continuous processing of fully drawn yarn(FDY), including two-for-one twisting,ironing(preshrinking) and false twisting,and turn FDY into elastic and soft yarn, It applied to circular knitting machine,water jet loom,seamless knitting machine and ribbon loon to produce various fabric.
Large Package Twisting Machine Large Package Twisting Machine,Wire Twisting Machine,Intelligent Twisting Machine,Double Sides Twisting Machine XINCHANG LANXIANG MACHINERY CO.,LTD , http://www.xclxjx.com
b. Weaving the braided wire evenly around the process as required.
c Install the runner on the knitting machine, and pull the braided wire head out of the hole.
d According to the length of the product requires a good take-up reel.
e Select the pitch gear according to the process requirements.
f Check whether the quality of the product in line with the production requirements.
2. Drive a. Pass the braided core through the lead hole of the braider.
b Start the machine and introduce the core from the lead hole to the take-up reel.
Third, in the process of driving a check runner lubrication, to prevent jumps.
b Weaving density does not match to increase or decrease the number of monofilaments.
c check the burr, too large should be repaired.
Fourth, parking a turn off the power.
b Wrap the braided cable end.
c Fill out the records, label the process card, and specify the model specifications, length, process name, operator and date.
d Send the scrap copper wire to the designated place.
Fifth, the quality requirements a knitted wire on the car should be smooth, no oil, bumps, oxidation and other phenomena.
b The braiding layer is not allowed to be connected continuously. The exposed threads should be trimmed. The length of the replacement ingot should not be less than 1 meter.
The c braid has no hole mark, uniform pitch, and neat rows.
Weaving machine operating procedures
Knitting Machine Operation Procedures 1. Preparation before Driving a Check the power supply and the operation of various parts of the machine, and add lubricant to each operation site.