Cheng Li Fuel Truck Fiberglass Boats,Others Marine Section,Marine Stuff HENGTAI INTERNATIONAL CO., LTD. , http://www.hengtai-power.com
Cheng Li Refueling Vehicle: Hubei Chengli Motor Company is located in the hometown of Yandi Shennong, the hometown of bells and ancient music, and has eight wonders of the world - the historical and cultural city of chimes - Suizhou. Here is a beautiful and beautiful scenery from the ancient mountains. As the National Development and Reform Commission designated production of professional automobile manufacturing enterprises; Dongfeng special car modification base. Cheng Li company has always been to take the high quality product quality and perfect after-sales service to walk in the forefront of China's special-purpose vehicle market. Registered trademark "Cheng Liwei" brand, its main varieties are sprinkler series; tank chemical vehicle series; sanitation garbage truck series; truck crane series, aerial working truck series, fire truck series, dump truck series, bulk cement truck series, Qing There are more than 300 varieties of eighteen series including the car series. All products passed the ISO9001-2000 international quality system certification and 3C mandatory certification. Hubei Chengli Special Purpose Vehicle Co., Ltd. was established in 2004 with a registered capital of more than 20 million. There are currently more than 1,500 employees. We solemnly declare: We have a strict quality system and strict after-sales service guarantee, 24 hours in place, allowing users to buy the rest assured that the use of peace of mind. Refueling vehicle information Jiangling tanker product technical data Product Name: Jiangling Oil Tanker Size (mm): 5990×1950×2290 Chassis Model: JX1060TG23 Carriage Size (mm): ×× Total weight: (kg) 5790 Approach/Departure angle (°) 20/18.5 Rated mass: (kg) 2500 Front/rear suspension (mm): 1015/1615 Curb weight: (kg) 3160 Maximum speed (km/h): 100 Emission Standards: GB17691-2005 State III, GB3847-2005 Chassis parameters Chassis Model: JX1060TG23 Fuel Type: Diesel Number of axes: 2 Front track (mm): 1385 Wheelbase (mm): 3360 Rear Wheelbase (mm): 1425 Number of passengers in the cab: 2 Number of springs: 7/5+5 Number of tires: 6 axle load: 2200/3590 Tire Spec: 7.00R16LT Vehicle description: Transport name: gasoline, density: 0.7 tons / cubic meter. The effective volume of the tank: 3.75 cubic meters, tank dimensions (length × long axis × short axis) (mm) 4100 × 1680 × 1030, tank length 4100 with front tank 1000. Engine parameters Engine Type Engine Manufacturer Displacement (ml) Power (kw) JX493ZLQ3 JX493ZLQ3A Jiangling Motors Co., Ltd. Jiangling Motors Corporation 2771 2771 85 75 Other information needs more small-scale refueling trucks, 3 tons of refueling trucks, 5 tons of refueling vehicles, and product pictures. Please contact our sales manager directly. We will provide you with the best service!
Refueling vehicles on the household to mobile refueling vehicles on the household, can not be on the private name of the household, need to find a unit with dangerous transport qualifications on the household, contact the dangerous chemicals company, affiliated units on the household.
Cheng Li fuel dispenser features self-priming fuel, self-discharging and other functions, can be divided into two to three different specifications of oil, equipped with double pump. The requirements of the user: The car purchaser must hold a certificate for the transport of dangerous goods, and the transporter must have a qualification certificate and an escort certificate.
Cheng Li Refueling Vehicle Operation Guide: 1. To ensure the cleanliness of the Chengli refueling truck, the tank and the oil delivery system should be cleaned regularly. The internal and external joints at both ends of the oil hose should be coated with lubricating oil. The tank truck can be easily disassembled and installed. After each time the tubing is completed, clean it in time to ensure that it is clean inside! 2. The use and maintenance of Chengli fuel tanker pump are strictly executed according to its use and maintenance instructions! 3, before refueling operations, must use the plug to insert moisture into the wet land, the tanker grounding tape should be grounded, the operation process should always maintain good static conduction! 4, Cheng Li fuel tanker safety valve, filter network should always check and clean! 5, tanks and piping systems should be cleaned regularly. Cheng Li refueling vehicle regularly check the pipe system joints are good, reliable sealing!
The use of fuel dispenser Note: 1, to the fuel dispenser power supply, to ensure that the voltage in the DC10V ~ DC30V range, so as not to peak voltage burn computer components. 2. Because the fuel supply pump to the refueling machine is self-provided by the automobile, in order to ensure the pressure stability, the automobile pipeline should be equipped with an overflow valve. If not, it should be noted when ordering, requiring the refueling machine with a relief valve to avoid damage. Tanker. 3. When using the oil gun (oil dispenser automatically returns the reel), avoid using the oil gun's oil filling pipe to knock on the oil receiving container, press the switch and other incorrect operation, this operation may damage the root of the oil filling pipe and cause oil leakage. To check regularly, tighten the stop screw on the fill tube to prevent loosening or damage to the root of the fill tube. 4. The tank should be cleaned regularly to keep the oil clean. 5. The filter is installed in front of the oil inlet of the tanker. Since the conditions of oil products are not the same everywhere, the replacement cycle of the filter cannot be clearly defined; when the flow of the tanker suddenly decreases, replace the filter; The traffic is still abnormal. Check whether other components affect the traffic. If the traffic is affected, replace the traffic.
The main function of the refueling vehicle is to use the vehicle's oil pump to inject the fuel from other containers with its own suction into the tank body of the vehicle. 2. Use the vehicle's oil pump to quickly withdraw the fuel from the vehicle's tank and fill it with other vehicles or containers. 3. Active pump station or gas station use. Second, the working principle and structure Car chassis The tanker was converted from Dongfeng and FAW Group's stereotyped chassis. For the second-class chassis used in each product, the structure is detailed in the enclosed "Automobile Chassis Manual". 2. Tank truck The structure of the tank is elliptic cylinder or body, made of high-quality steel plate, the whole tank is divided into two compartments and four compartments (or multiple compartments and multiple compartments), and the bottom of the middle baffle has through holes. The middle compartment of each compartment is welded to strengthen the anti-wave. Partitions are used to reduce the impact of fuel oil in the tank during driving and improve the rigidity of the tank. In order to prevent corrosion, the outer surface of the tank is coated with anti-rust paint and decorative paint. A tank indicator is installed in the middle of the tank. The tank can directly indicate the volume of the tank when it is refueled or discharged to the tank. (Optional) The canisters are 500mm diameter holes for maintenance. The big cover is fastened to the can bottom by bolts. The small cover and the big cover are connected together by a support pin and a lug. Turn the handle on the small cover clockwise to compress the small cover. Reverse, after the ear plate is released, the small cover can be opened, and the breathing valve is installed on the upper side of the lid. 3. Breathing valve In order to ensure that the refuelling truck is in operation, the pressure in the tank is basically the same as the atmospheric pressure, and a breathing valve is installed in the tank. When the oil in the tank is heated to expand or when the tank is refueled by an oil pump, the oil level in the tank rises. The pressure increases. When the pressure in the tank is higher than 8Kpa in the outside world, the valve on the breathing valve opens. When the oil is pumped out to the outside or the oil is cooled and contracted, the oil level drops and the pressure decreases. When the tank pressure is lower than the outside When the pressure is 3 Kpa, the valve below the breathing valve opens. 5. Power take-off The power take-off matched to the chassis gearbox will be described below. 6. Oil pump Optional self-priming centrifugal oil pump or gear oil pump, the performance of the oil pump instructions. 7. Delivery hose The oil delivery hose adopts CRJ65 type quick joints, direct main type, end rubber ring seal, quick disassembly, convenient and reliable sealing. The oil delivery hose assembly is electrically conductive and safe to use. The ball valve is composed of a valve seat adjustment seat, a seal ring, a ball, a stem handle, etc. The ball valve can be opened and closed by moving the handle by 90°. The ball valve can be rotated and adjusted to meet the requirement.
Cheng Li Fuel Truck
The China Automotive Industry Refueling Vehicles Catalog contains a list of China Ministry of Industry and Information Technology's refueling car cars. All 9 Categories 178 Manufacturers 154 Refuelling Vehicle Brands 4194 Refueller Product Information, Latest Refueling Vehicle Bulletin, Environmental Notice, Fuel Bulletin, Free Announcements, pictures, news, and the most timely refueling truck quote price information. Tanker vehicle owners must issue a purchase invoice (purchasing additional tax), vehicle certification (collision inspection announcement), chassis certification, Dongfeng and Futian chassis companies need to issue a chassis certificate, tank inspection report (usually to take traffic management When used for certificates). Then the driver will go to the vehicle management office to apply for "dangerous goods transport qualification certificate." In addition to the driver's license and operation certificate, the driver of a tanker truck must also apply for the “Dangerous Goods Industry Qualification Certificateâ€. A vehicle operation permit is a legal certificate of a vehicle engaged in road transport business activities. If the vehicle does not have a business license, it is an unlicensed operation, which is commonly referred to as a "black car." The qualification certificate for dangerous goods refers to the driver who transports dangerous articles (such as oil, explosives, chemical raw materials, etc.). In addition to the driving qualification certificate, he must go to the local transportation administration department and send it to the dangerous goods after corresponding training. Only professional qualification certificates can be used to transport dangerous goods. Customs procedures 1. Fuel truck certification 2. Motor vehicle invoice 3. Tank test report issued by tanker manufacturer 4. Affiliation (Dangerous Goods Operation Fleet) Certification 5, affiliated units tax application form. User charges 1. Purchase additional tax, levied according to 10% of the taxable price of motor vehicle invoices 2, insurance, refueling car insurance must pay the full insurance 3, vehicle and boat use tax 4, affiliation unit's GPS installation fee 5, linked to the unit deposit and related expenses 6, household registration procedures related expenses 7, other expenses According to general experience, the cost of 3 tons of Dongfeng Xiao Bawang refueling vehicles is about 31,000 yuan, and that of 4.5 tons of Dongfeng Duolika refueling vehicles is about 38,000 yuan. Another: the driver needs to obtain the escort officer's card, but also need to have a dangerous goods business qualification certificate, the driver needs B1 or more driving qualifications. Cheng Li Refueling Vehicle Use Chengli Refueling Truck is mainly used for the transportation and storage of petroleum derivatives (gasoline, diesel, crude oil, lubricating oil, coal tar, etc.). According to different use and use environment, there are many kinds of refueling or transporting oil functions, which have the functions of oil absorption, pump oil, multiple oil loading and distribution. Cheng Li fuel truck special parts from the tank, power take-off, transmission shaft, gear oil pump, pipe network system and other components. The pipe network system consists of oil pumps, three-way four-position ball valves, two-way ball valves, strainers and pipes. Cheng Li Fuel Tanker Product Remarks Tank Material: Carbon steel, stainless steel, aluminum alloy, pure aluminum can, rubber lined, rotomolding, plastic tank, fiberglass tank, as required. Can type: round, oval, round Oil pumps: self-priming pumps, gear pumps, chemical pumps, stainless steel pumps, centrifugal pumps, heavy oil pumps. Oil gauges: single-count, double-count, tax-controlled fuel dispensers. Function: Can separate positions, can be divided into different oil products, chemicals, food. Designed to achieve pumping, pumping out of the table, the pump into the pump but the table, self-flow over the table, but the table and other functions. All Chengli refuellers can be designed into chemical vehicles and various types of heating and insulation series tanks; all tanker trucks can be equipped with computer refueling machines; a wide range of users can choose to meet the needs of users; tanks are equipped with Multiple anti-wave separators. The use of high-pressure gas leak detection, so that the tank has high strength, stable center of gravity, vehicle safety and stability features such as Chengli refueling tank structure Tank structure is oval cylindrical or trapezoidal cylindrical body, made of high-quality steel, the entire The tank can be divided into single or multiple compartments, and the compartment can be divided into chambers. There are through holes at the lower end of the intermediate baffle. Each compartment has a sub-warehouse or a multi-warehouse. The chamber can be divided into chambers. The bottom of the intermediate baffle has through holes. There are sub-bins to strengthen the wave separator to reduce the impact of the oil in the tank body and improve the rigidity of the tank. Tanker breathing valve In order to ensure that the Chengli truck is working, the pressure in the tank is basically the same as the atmospheric pressure. A breathing valve is installed on the lid of the tank. When the oil in the tank is heated to expand or when the oil is pumped into the tank, the oil level in the tank is increased. As the pressure rises, the valve on the breathing valve opens when the pressure in the tank is higher than the external pressure of 8 KPA. When the oil is pumped outward or the oil shrinks, the oil level drops, the pressure decreases, and the pressure in the tank falls below When the external pressure is 3KPA, the valve below the breathing valve opens.