At present, the performance of urban self-loading garbage trucks cannot fully meet the needs of the market. The market-demanding urban self-loading garbage truck garbage truck product technology should have the following characteristics. 1, a high degree of automation. The closed compressed garbage trucks in the city's self-loading garbage trucks are rubbish transport vehicles used in combination with compression garbage stations. When the vehicles are docked with the station's compression boxes, the hydraulic system is set in the middle of the carriage. The mechanism that connects the rear door automatically opens the rear door. After docking with the station, the hydraulic device of the compression station pushes the compressed garbage into the garbage compartment. Then the garbage truck automatically closes the back door and carries the garbage away. When the garbage truck leaves, the rear door automatically opens, and the car body is lifted by a lifting mechanism consisting of a cylinder, a triangle plate, and a pull arm provided on the sub-frame, so that the car body rotates around the rear-end reversal axis by 55 degrees to dump garbage. Outside the cabin. The car then lands in place and the rear door automatically closes. This shows that the product has the advantages of convenient loading and unloading of garbage, high degree of automation, and high work efficiency. Monitoring device and data transmission device. In the cab, a video monitoring device for operational supervision is installed to monitor the loading and unloading operation status of the garbage, and an automatic noise detection and recording device, data storage, and on-line transmission device are installed. 2. The hydraulic operating system is advanced and reliable. The hydraulic control system of the city's self-loading garbage truck adopts the three-position four-way electromagnetic reversing valve imported from Italy. It features small size, long life, reliable performance, convenient operation, and automatic operation devices for the rear door opening and the car body turnover. Rubbish in the stuffer can be automatically cleared. That is, the operation of the scraper scraper can be controlled at the side of the cab or the compartment when discharging, and the garbage in the stuffer and its hopper can be removed. 3, lightweight design of the car body, load quality. The materials of the compartments of the city's self-loading and unloading garbage transporter can adopt manganese steel instead of the traditional carbon steel, and its weight is more than 20% lighter than the similar vehicle body. Therefore, the product design is conducive to energy-saving emission reduction, and to reduce the fuel consumption for users, reducing the cost of the product. 4, the back door institutions design advanced. The rear door opening mechanism can refer to the advanced European model design. It has a compact and reasonable structure. It has a small occupied width and gives more space for the width of the cabin, which makes the width of the cabin larger and makes it easier for the driver of the car. The docking of various types of garbage compression stations facilitates the improvement of work efficiency and avoids the occurrence of accidents during collisions between vehicles and stations. 5, dump system uses a combination of cylinder and rod system design, advanced performance. The combined dumping mechanism of the oil cylinder and rod system has the advantages of good sealing performance, no leakage of hydraulic oil, long working life, reliable performance and good stability. In particular, due to the poor road conditions of the product in the dump site, the fuel tank will not protrude from the lower part of the chassis frame of the car, and its passing performance is better than that of the push-push cylinder. 6, the appearance of the vehicle is beautiful, easy to clean and self-cleaning. The design of the compartments of the city's self-loading and unloading garbage trucks adopts the framework structure of the door frame, which is more economical and smooth than the traditional skeletal frame structure of the dump truck, and the appearance is smooth and smooth. There is no horizontal directional skeleton in the cabin, so it is not easy to retain dirt; especially the top, Avoid the rain in the square box of the same type of vehicles can not row out, easy to cause the lack of corrosion on the top of the compartment. The exterior surface materials of this product adopt the surface treatment process such as phosphating, the paint has strong adhesion, the surface is corrosion-resistant and smooth, it is convenient for vehicle cleaning, and its self-cleaning performance is much better than similar models. 7, large capacity, strong environmental protection. The self-assembled and disassembled garbage truck of the city adopts a fully-sealed structure. The seal assembly adopts a high-quality material with a long service life, and the vehicle is loaded with rubbish that has been compressed and treated. Under the same volume, the load quality increases, and no Sewage spills will not contaminate roads and secondary pollution will be completely eliminated throughout the operation. Low operating noise. Urban self-loading garbage truck products should be optimized through the hydraulic system and loading mechanism to improve the machining accuracy and assembly quality so as to reduce the noise of vehicle operations. Electric vehicle (BEV) refers to a vehicle that is powered by an on-board power source and uses an electric motor to drive its wheels, meeting various requirements of road traffic and safety regulations. Due to its relatively small impact on the environment compared to traditional cars, its prospects are widely optimistic. Electric Car,New Energy Electric Vehicle,Electric Used Car,Mid Size Pure Electric Vehicle Chongqing Huanyu Automobile Sales Company , https://www.nbhuanyuauto.com
The main difference (difference) between pure electric vehicles and gasoline vehicles lies in the four major components: drive motors, speed controllers, power batteries, and on-board chargers. Compared to gas stations, it consists of a public ultra fast charging station. The quality difference of pure electric vehicles depends on these four major components, and their value also depends on the quality of these four major components. The use of pure electric vehicles is also directly related to the selection and configuration of the four major components.