Product Profile Large energy saving ceiling fans are green energy saving products of the 21st century. It has many advantages, such as powerful, no noise, zero pollution, low energy consumption. It is very popular for large masses of users. It is not only mainly used in steel structure plant, logistics warehouse, farm and other large enterprise buildings, but also agricultural markets, gymnasiums, waiting rooms, exhibition halls and other large public buildings. A large energy-saving ceiling fans with a speed of 50 revolutions per minute 1 to 3 meters per second to make the human body feels the best wind speed. A breeze from all directions gently caresses the body and increases the evaporation of human sweat. The cooling effect of 5 to 8 degrees is similar to the comfort presented by the natural breeze, which can not be matched by other fans. It is an ideal choice for indoor, ventilation and cooling in summer to remove humidity and heat. Only seven degrees of electricity per day, it can be cool for a whole summer. Energy saving comparation In summer, the sun shines directly and the indoor temperature is more than 40 degrees on average. Common industrial exhaust fans can only increase the indoor temperature. Industrial air conditioners consume thousands of kilowatts of energy every shift. There is no obvious unenclosed cooling in the space, which also increases the operating cost of enterprises. The emergence of a large energy saving ceiling fan brought the perfect solution. An energy saving fan with a diameter of 7.2meters can push the air to produce a large amount of winds effectively. The continuously rotating blades of circular form an airflow field with an effective area of 600 to 800 square meters. No other device has not yet been compared. The large energy-saving ceiling fan praduced by Linter technology has the characteristics of high reliability, feasibility and low power consumption. The controller unit used the stability of the energy-saving inverter system. In practice, the average power consumption is less than one killowatt per hour. It can guarantee more than 5,000 hours of uninterrupted operation. Linter7200 of a large energy-saving ceiling fan can cover the area of about 50 small fans of 0.75 megabytes worked. In a factory of 9000 square meters, if full coverage is to be achieved, it needs about 300 small fans or industrial 6 energy-saving fans. According to the use of four years, every eight months, every day for ten hours, can be run for 10,000 hours, about 90000kw power consumption, than the small wind 1080000kw, save 990000kw, save energy by 92%. When meeting the extreme high temperature climate, the large energy saving fans and air conditioners are used together, it will be coller. Using A large energy-saving ceiling fan for air supply can not only save the air conditioning tube, but also save more than 30% energy. Attentio Lectotype The building structure: H-shaped steel, I-shaped steel, Mixed steel square bar spherical column spherical structure. The total height of the building is more than 4, 0m, less than 15m. 1, 0m. The minimum distance between the fan and the roof is 1, 0m. The minimum safety distance between the fan blades and the obstacle is 0, 3 m. The distance between the fan blades and the wall on both sides is more than 1, 5 m. Effects of various environments on fan performance. Open space, promotes air circulation. Indoor airflow circulation in enclosed spaces is suitable for use with air conditioning. In a multi-fan environment, due to the low wind speed, caused by the fan, there will be no cyclones. The distance between the two fans will be separated before the wind will not cancel, and the coverage area will be increased at the same time. Company Information HongFa automatic door Technology (Shenzhen) Co., Ltd is a high-tech enterprise which engages in the development of advanced world-class automatic doors. Our main products include industrial fast rolling door, industrial PVC rolling door, industrial PVC rolling door, fast rolling door, rolling door, fast rolling door, rolling door, industrial automatic lifting door, industrial automatic lifting door, automatic vertical hinged door, automatic stainless steel door, automatic doors, automatic doors, electric folding gate, rolling door, automatic doors, automatic doors, automatic doors, automatic doors,
Industrial ceiling fan,electric fan,industrial fan SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfarrd.com
· Specifications:MED- L-SPX-III
Â
Â
ApplicationRange:
The type of product has excellent performance in the R&D for environmental protection, medical,health and disease prevention,drug testing,zoology and phytology,oceanographyand food engineering. It is appropriate thermostatic equipment for BOD water body analysis,bacterial,virus,microbial culture preservation,plant cultivation and breeding experiments.
Structural Characteristics:
1. Round edge design of box body and chamber for easy cleaning.
2.Mirror surfacechamber and detachable shelves.
3.Powersupply outlet and lamp inside.
4. Forced convention by electric fan.
5. Magnetic sealing of door and double door with observation window.
6. With cooling function. The temperature can be increased and decreased.
7. Intelligent temperature controller with LED display shows the pre-set temperature and measured temperature. The temperature control is accurate and reliable.
8. RS485 interface is connected to computer for data storage and retrieve during the experiment.
9. Double door designing, the inner door is made of tempered glass for easy observation. The outer door adopts the magnetic sealing.
10. An external printer records the real-time data of temperature and time.
Technical Parameters:
Model
SPX-150-III
SPX-200-III
SPX-250-III
SPX-300-III
SPX-400-III
Capacity(L)
150
200
250
300
400
Temperature Control Range(ºC)
5~50
Temperature Fluctuation(ºC)
±0.5
Temperature Uniformity(ºC)
 ±1
Timing Range(min)
0~99 h 59min
Rated Power(W)
300
350
450
500
600
Cooling Agent
R134a
Electric Power
220±10%V   50Hz
Working Time
Continuous
Operation Room Dimension(cm)
45×42×85
45×45×100
48×49×107
52×50×117
58×54×127
Overall Dimension(cm)
59×62×141
59×64×156
62×68×163
66×69×173
72×74×183
Package Size(cm)
75×78×160
75×80×175
78×84×182
82×85×192
88×90×202
Net Weight / Gross Weight(kg)
90/120Â
95/138
103/147
115/157
135/170
Â
Â
· Product Name: MED-L-SPX-III Biochemical incubator
· Specifications:MED- L-SPX-III
Â
Â
ApplicationRange:
The type of product has excellent performance in the R&D for environmental protection, medical,health and disease prevention,drug testing,zoology and phytology,oceanographyand food engineering. It is appropriate thermostatic equipment for BOD water body analysis,bacterial,virus,microbial culture preservation,plant cultivation and breeding experiments.
Structural Characteristics:
1. Round edge design of box body and chamber for easy cleaning.
2.Mirror surfacechamber and detachable shelves.
3.Powersupply outlet and lamp inside.
4. Forced convention by electric fan.
5. Magnetic sealing of door and double door with observation window.
6. With cooling function. The temperature can be increased and decreased.
7. Intelligent temperature controller with LED display shows the pre-set temperature and measured temperature. The temperature control is accurate and reliable.
8. RS485 interface is connected to computer for data storage and retrieve during the experiment.
9. Double door designing, the inner door is made of tempered glass for easy observation. The outer door adopts the magnetic sealing.
10. An external printer records the real-time data of temperature and time.
Technical Parameters:
Model
SPX-150-III
SPX-200-III
SPX-250-III
SPX-300-III
SPX-400-III
Capacity(L)
150
200
250
300
400
Temperature Control Range(ºC)
5~50
Temperature Fluctuation(ºC)
±0.5
Temperature Uniformity(ºC)
 ±1
Timing Range(min)
0~99 h 59min
Rated Power(W)
300
350
450
500
600
Cooling Agent
R134a
Electric Power
220±10%V   50Hz
Working Time
Continuous
Operation Room Dimension(cm)
45×42×85
45×45×100
48×49×107
52×50×117
58×54×127
Overall Dimension(cm)
59×62×141
59×64×156
62×68×163
66×69×173
72×74×183
Package Size(cm)
75×78×160
75×80×175
78×84×182
82×85×192
88×90×202
Net Weight / Gross Weight(kg)
90/120Â
95/138
103/147
115/157
135/170
Â
Â
Med-L-Spx-III Biochemical Incubator Laboratory Incubator
Model NO.: MED-L-SPX-III
Working Time: Continuous
Electric Power: 220+/-10%V 50Hz
Operation Room Dimension(Cm): 45*42*85t45*45*100t48*49*107t52*50*117t58*54*127
Overall Dimension(Cm: 59*62*141t59*64*156t62*68*163t66*69*173t72*74*183
Net Weight / Gross Weight(Kg): 90/120 T95/138t103/147t115/157t135/170
Trademark: Med Equipment
Origin: Guangzhou China
Model NO.: MED-L-SPX-III
Working Time: Continuous
Electric Power: 220+/-10%V 50Hz
Operation Room Dimension(Cm): 45*42*85t45*45*100t48*49*107t52*50*117t58*54*127
Overall Dimension(Cm: 59*62*141t59*64*156t62*68*163t66*69*173t72*74*183
Net Weight / Gross Weight(Kg): 90/120 T95/138t103/147t115/157t135/170
Trademark: Med Equipment
Origin: Guangzhou China
· Product Name: MED-L-SPX-III Biochemical incubator