When you buy a new high-pressure cleaner and want it to work, then we will like to care for our children and want to keep it well. Of course, you do it in addition to the beautiful appearance, the body must pay more attention to the body, then when you need to pay attention to what matters when operating the high-pressure washing car? From the Baidu Encyclopedia, we can understand the meaning of the high-pressure cleaning vehicle is to clear the sewer, it is the use of high pressure principle to open the sewer blockage, and sometimes our own karate blocking, then there is a need for a high pressure cleaning vehicle. When it uses the nearest principle stream as a water source, it is necessary to completely submerge the suction pipe end to allow the presence of high-pressure gas. Of course, it is also necessary to avoid inhaling obstacles such as stones and sediments. Therefore, the suction pipe should be provided with a filtering device. The two of them are integrated. It is forbidden to disassemble the filtering device and it must be ensured that it does not contain foreign objects. The first step is to control the water source. Then we must pay attention to how to divert water. There is a centrifugal pump in the high-pressure cleaning vehicle. Before each water absorption, a certain amount of water must be added to the pump. Water outlet. When the self-priming pump is used for the first time, it is necessary to add water, and it is unnecessary to add water afterwards. When entering the water pipe system must maintain a certain vacuum in order to suck water into the tank, then we must ensure that the water pipe system is sealed and reliable, the hose can not be damaged, otherwise there will be leakage phenomenon, which will cause suction Not the reason for the water. When the above steps are all completed, the power take-off device must be engaged at the time of parking before the high-pressure cleaning vehicle or before the water absorption. If it is in the winter, then we will empty the water in the pipes at the end of each operation so that it will not cause freezing. However, in the northern part of China, the construction of the winter is not allowed. If construction has already been completed, then how will we maintain him? A good car will give us great benefits, so we also need to take care of it. First, it must be cleaned. Before cleaning, ensure that the water temperature is cooled to below 60 degrees, the ambient temperature is maintained at 0-40 degrees, the water gun is more than 15 centimeters away from the body paint surface, and the order of flushing is the same as our small bridge car. the same. When rinsing the grille part in front of the car, misty water flow should be used, and the water column should not be flushed against the fins of the water tank or condenser. If the plastic arch cover is installed at the mudguard, it should be removed and cleaned, and the mudguard should be thoroughly cleaned. , Fender inside. Finally, rinse the car wash thoroughly with plenty of clean water, and dry it with a synthetic sheepskin towel. Wipe dry to achieve the whole car water-free traces, no stains on the glass. Of course, we must give it a liquid after we clean it, and spill the shampoo car wash on the body. There are two methods, one is to use multi-functional high-pressure foam washing machine, spray evenly, to the upper and lower regularly shaking nozzle; the second is manual preparation, that is, according to a certain proportion of shampoo car wash liquid, do not use washing powder, soapy water, Dewaxing detergent. These two methods to see which one you use is convenient. Paint Stripping Machine,Putty Sprayer,Airless Paint Machine,Electric Airless Sprayer Fuzhou HVBAN Mechanical Equipment Co., Ltd. , https://www.hi-sprayer.com