What are the common faults of the permanent magnet cartridge magnetic separator and the causes of the malfunction?

Common faults and their causes:
(1) The magnetic separator motor overheats and its sound is abnormal.
The reasons are as follows: 1) poor bearing lubrication or serious wear; 2) fan blade falling off or wearing; 3) poor contact of the switch circuit, or single phase disconnected, 4) voltage is too low.
(2) The magnetic separator is not sound properly during operation, the cylinder is caught by the obstacle, and even the cylinder cannot be rotated, and the bottom box vibrates.
The reason is often that the object in the bottom box is stuck, and then the magnetic block is detached, so that the cylinder creaks, and in severe cases, the barrel is scratched. At this time, stop the vehicle for repair and troubleshoot.
(3) The reducer is overheated. Causes: 1) insufficient oil or poor oil quality; 2) excessive wear of the gear and worm, or poor meshing; 3) poor lubrication or wear of the bearing.

Window Material

Window materialdozens of varieties, more than 1,000 kinds of specifications, Changchun Taiyuan Fluorine Gold Mica Co., Ltd. produces Window material