G-type single-screw pump is based on the principle of turning to engage the new volume of positive displacement pump. The main working parts are eccentric screw (rotor) and fixed bushings (stator). Non-toxic and tasteless use of edible rubber, the working temperature up to 120 degrees Celsius, if the high temperature of 120 degrees Celsius -350 degrees Celsius can contact with the unit. Due to the special geometrical beginnings of the two parts, a separate sealing cavity is formed, respectively. Medium by the axial uniform flow. Low internal flow rate, the volume remains unchanged. The pressure is stable and therefore will not vortex and agitate the product. Each stage of the pump output pressure 0.6MPa-1.2MPa, lift 60m-120m (water), self-priming height generally above 3m. Because the stator is made of a variety of elastic materials, this pump can deliver 80% fluid with high viscosity and hard medium containing particles or medium containing fibers. Its flow and speed is proportional to, widely used in food and metallurgy, papermaking, printing and dyeing, chemical, fertilizer and other industrial sectors. Transmission can be directly driven by the coupling, or the use of high-speed motor, V-belt, gearbox and other devices speed. More Search Keywords: Pumps Maxtone Frp Sandwich Panel,Frp Sandwich Panel,Frp Foam Core Panels,Foam Core Panels YANGZHOU MAXTONE COMPOSITE CO.,LTD. , https://www.maxtonetruckbody.com
The pump parts less, compact, small size, simple maintenance, the rotor and stator are consumables of the pump, the structure is simple, easy to assemble and disassemble.
G-type screw pump working principle and characteristics of G-type screw pump is based on the principle of rotation to engage the new type of positive displacement pump. The main working parts are eccentric screw (rotor) and fixed bushings (stator). Due to the special geometrical beginnings of the two parts, a separate sealing cavity is formed, respectively. Medium by the axial uniform flow. Internal flow rate is low, the volume remains unchanged. The pressure is stable, so there is no turbulence and agitation. Each stage of the pump output pressure 0.6Mpa, lift 60m (water), self-priming height generally above 3m. Because the stator is made of a variety of elastic materials, the pump can not handle the high-viscosity fluid delivery and the transportation of hard suspended particle media or fiber-containing media. Its flow and speed is proportional to. Transmission can be directly driven by the coupling, or the use of high-speed motors, V-belt, gearbox and other devices speed. Small parts, compact structure, small size, simple maintenance, the rotor and stator is the pump wearing parts, simple structure, easy assembly and disassembly.