One. The main structure of the reciprocating pump and the main working principle Working principle: When the piston moves from left to right to form a negative pressure within the pump cylinder, sump liquid into the pump cylinder through the suction valve. When the piston moves from right to left, the liquid in the cylinder is squeezed, the pressure increases, and it is discharged by the discharge valve.
In the die casting industry, according to the difference of equipment, it can usually be divided into cold chamber die casting and Hot Chamber Die Casting. Cold chamber die casting is most used in aluminum alloy die casting. Cold chamber die casting is suitable for die casting of various non-ferrous metals, and its models are relatively complete, and the die castings of large and small parts are more suitable for production; the production operation is relatively simple, the production efficiency is high, and it is easy to automate. At present, the most used in the industry is also cold chamber die casting.
SCZY provides one-stop services such as mold development, die-casting production, product follow-up CNC machining, and product surface treatment. We have our own precision mold workshop, die-casting production workshop, and follow-up precision CNC workshop, which can ensure delivery and quality at the same time. It also provides outsourced surface treatment services, so that customers can have no worries.
Cold Chamber Die Casting, Die Casting Aluminum, Alu Die Casting, Custom Die Casting,Cold Chamber Die Casting Process Shenzhen SCZY Technology Co.,Ltd , https://www.szsczycasting.com
Pistons reciprocate, each suction and discharge a liquid, called a work cycle; this pump is called a single action pump.
If the piston from time to time, each inhalation and discharge of liquid twice, known as double-acting pump.
Pistons move from one end to the other end, called a stroke.
Reciprocating pump flow and head reciprocating pump flow and pressure head has nothing to do with the size of the pump cylinder, piston stroke and reciprocation frequency.
The theoretical flow of a single acting pump is: QT = Asn
The actual flow of the reciprocating pump is smaller than the theoretical one and decreases with the increase of the pressure head, which is caused by the leakage. Reciprocating pump head and pump flow and pump geometry has nothing to do, but by the pump mechanical strength, the power of the prime mover and other factors.
Reciprocating pump installation height and flow adjustment Reciprocating pump start without filling liquid, because the reciprocating pump self-priming capacity, but the vacuum suction height also depends on the installation area of ​​?? the atmospheric pressure, the nature of the liquid and the temperature changes , So the reciprocating pump installation height also has certain limit.
Reciprocating pump flow can not be discharged with the valve on the pipeline to adjust, but should be used by the bypass pipe or change the reciprocation of the piston to change the piston stroke to achieve.
Before starting the reciprocating pump, the valve in the discharge line must be opened. The piston of the reciprocating pump is connected with the prime mover by the connecting rod crankshaft. The prime mover can be used motor, steam engine can also be used.
Reciprocating pumps for high-pressure head, small flow, high-viscosity liquid delivery, but not for transporting corrosive liquids. Sometimes directly driven by the steam engine, delivering flammable, explosive liquids. 